Modulation and Refinement of In–N re-Bonding of InGaN Through in Post-Flow During a Refined Temper Fire Treatment Process
Open Access
- 16 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 224433-224438
Abstract
In this article, we describe a subtle method for modulating and refining the indium–nitrogen (In–N) re-bonding effect of InGaN by employing an In post-flow during temper fire ( $\Delta T = 110\,^{\circ }\text{C}$ ) treatment. After optimizing the In flow rate and the temper fire treatment process, the In content in InGaN quantum wells (QWs) increased from 12.7 to 22.3% and the (102) epitaxy quality of InGaN improved, as revealed by the full-width at half-maximum (FWHM) of the X-ray diffractometry signal decreasing from 410 to 374 arcsec. In addition, the quality of a five InGaN/GaN multiple-QW epilayer surface also improved greatly when applying this technique. Merely by modulating the In post-flow rate (0, 5.6, 11.2, 16.8, 22.4, or $28.0~\mu $ mol/min), the In x Ga 1−x N photoluminescence signal (and FWHM) changed from 449 nm (58 nm) in the absence of In post-flow during the temper fire treatment process, to 523 nm (46 nm) when the In post-flow rate was $11.2~\mu $ mol/min, and to 534 nm (55 nm) when the In post-flow rate was $28.0~\mu $ mol/min. This technique is, therefore, effective at improving the InGaN quality and compensating for the In–N bond desorption rate.
Keywords
Funding Information
- Ministry of Science and Technology (MOST), Taiwan (MOST 108-2221-E-182-056)
- Chang Gung Memorial Hospital (BMRP 591)
This publication has 22 references indexed in Scilit:
- Enhanced light output power of InGaN-based amber LEDs by strain-compensating AlN/AlGaN barriersJournal of Crystal Growth, 2016
- Relationship between misfit-dislocation formation and initial threading-dislocation density in GaInN/GaN heterostructuresJapanese Journal of Applied Physics, 2015
- InGaN Light-Emitting Diodes onc-Face Sapphire Substrates in Green Gap Spectral RangeApplied Physics Express, 2013
- 740-nm emission from InGaN-based LEDs on c-plane sapphire substrates by MOVPEJournal of Crystal Growth, 2012
- Optical, structural investigations and band-gap bowing parameter of GaInN alloysJournal of Crystal Growth, 2009
- Buffer optimization for crack-free GaN epitaxial layers grown on Si(1 1 1) substrate by MOCVDJournal of Physics D: Applied Physics, 2008
- Suppression of Nonradiative Recombination by V-Shaped Pits inQuantum Wells Produces a Large Increase in the Light Emission EfficiencyPhysical Review Letters, 2005
- Compositional dependence of phase separation in InGaN layersApplied Physics Letters, 2004
- Slip systems and misfit dislocations in InGaN epilayersApplied Physics Letters, 2003
- Determination of twist angle of in-plane mosaic spread of GaN films by high-resolution X-ray diffractionJournal of Crystal Growth, 2003