Study of the Effect of Radiation Exposure on Grain Size and Mechanical Properties of Thin-Film Aluminum
Authors:
- 1 February 2024
- journal article
- research article
- Published by Pleiades Publishing Ltd in Mechanics of Solids
- Vol. 59 (1) , 20-26
Abstract
For the first time, an experimental dependence of the grain size and mechanical properties of a thin-film aluminum material on the dose of short-wave radiation has been obtained. A thin film of aluminum was formed on a silicon substrate using magnetron sputtering. The effect of a decrease in mechanical strength and biaxial elastic modulus with increasing radiation dose was identified. This effect is explained by a decrease in grain size and roughness on a thin-film aluminum membrane. For the microscopically measured range of aluminum grain sizes, the inverse Hall-Petch relation is used. During the research, it was determined that during irradiation the number of grain boundaries and the number of grains themselves increases, which leads to an increase in the likelihood of deformation.Keywords
This publication has 9 references indexed in Scilit:
- A Study of the Structural and Surface Morphology and Photoluminescence of Ni-Doped AlN Thin Films Grown by Co-SputteringNanomaterials, 2022
- Study of the Mechanical Properties of Thin-Film Membranes Made of Oxide and Silicon NitrideMechanics of Solids, 2022
- Effects of Al2O3 surface passivation on the radiation hardness of IGTO thin films for thin-film transistor applicationsApplied Surface Science, 2022
- Evaluation of the radiation damage effect on mechanical properties in Tehran research reactor (TRR) cladNuclear Engineering and Technology, 2020
- Radiation Defects in Aluminum Nitride under Irradiation with Low-Energy C2+ IonsHigh Energy Chemistry, 2019
- Radiation Effects in Materials2016
- The inverse hall–petch relation in nanocrystalline metals: A discrete dislocation dynamics analysisJournal of the Mechanics and Physics of Solids, 2016
- Microscopic strength of silicon particles in an aluminium–silicon alloyActa Materialia, 2016
- Accurate determination of the mechanical properties of thin aluminum films deposited on sapphire flats using nanoindentationsJournal of Materials Research, 1999