Tribological Behavior of Copper–Graphite Composites Reinforced with Cu-Coated or Uncoated SiO2 Particles
Open Access
- 29 November 2018
- Vol. 11 (12) , 2414
Abstract
Copper–graphite composites reinforced with SiO2 particles were fabricated by powder metallurgy technique. Electroless copper plating was introduced to improve the interfacial bonding between SiO2 particles and copper matrix. The microstructure, density, and hardness of the composites were characterized. The tribological properties, such as friction coefficient and wear rate of the composites, were studied using a pin-on-ring tribometer. The results show that the hard SiO2 can restrict the severe plastic deformation and adhesion contact in the process of wear. At the same time, parts of SiO2 particles can be broken into fine particles during wear process, which is helpful for decreasing adhesion wear and abrasive wear. Therefore, the addition of SiO2 leads to increasing friction stability and friction coefficient, and decreasing wear rate. In addition, the electroless copper plating improves the interfacial bonding between SiO2 and copper matrix, which prevents separation of SiO2 from copper matrix and further increase tribological properties of the composites.Keywords
Funding Information
- National Natural Science Foundation of China (51805046, 51874043)
This publication has 38 references indexed in Scilit:
- Microstructure and properties of graphite-reinforced copper matrix compositesJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2018
- Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trainsTribology International, 2018
- Properties and microstructure of nickel-coated graphite flakes/copper composites fabricated by spark plasma sinteringCarbon, 2017
- Effects of solid lubricants, load, and sliding speed on the tribological behavior of silica reinforced composites using design of experimentsMaterials & Design (1980-2015), 2015
- The influence of size and distribution of graphite on the friction and wear behavior of Ni–graphite coatingsSurface and Coatings Technology, 2014
- Copper Substitution and Noise Reduction in Brake Pads: Graphite Type SelectionMaterials, 2012
- Effect of the ratio of graphite/pitch coke on the mechanical and tribological properties of copper–carbon compositesWear, 2010
- High-speed sliding characteristics of Cu–Sn-based composite materials containing lamellar solid lubricants by contact resistance studiesWear, 2008
- Worn surface characteristics of Cu-based powder metallurgy bake materials for aircraftTransactions of Nonferrous Metals Society of China, 2007
- The role of graphite particles in the high-temperature wear of copper hybrid composites against steelMaterials & Design (1980-2015), 2006