Reinforcement-Matrix Interactions and Strengthening Model Validity in Magnesium Matrix Composites: A Critical Review
Open Access
Abstract
Magnesium matrix composites are attractive for weight-critical structures, yet the way their strength is explained has hardly changed in two decades. Most studies partition the yield-strength gain into load transfer, Hall–Petch, Orowan, and thermal-mismatch increments and combine them by a linear, root-sum-square, or compound rule. Reinforcement alters the interphase chemistry, the recrystallised grain structure and texture, the relative contribution of twinning and non-basal slip to deformation, and the kinetics of matrix precipitation. The inputs to all terms in the equation change simultaneously, so the terms are not independent in these systems. A sensitivity analysis of the equation for a typical nanoparticle-reinforced alloy showed that the predicted gain at 1 vol% reinforcement could be as low as 100 MPa or as high as 220 MPa. Independent predictions typically miss the experimental results by 10–165%. Twinning-sensitive behaviour is almost never included in strengthening analyses. We propose a minimum evidence chain for strengthening analyses: a matrix control processed identically to the reinforced alloy, measured rather than assumed inputs, compression and load-unload-reload tests on the reinforced alloy, texture-aware coupled models with uncertainty, and blind validation outside the calibration window. This approach could move strengthening analyses from post hoc accounting towards predictive design.Keywords
This publication has 224 references indexed in Scilit:
- Characterization of AZ61 magnesium composites processed through squeeze casting and hot rollingInteractions, 2026
- Achieving Superior Strength‐Ductility Synergy in Bionic Magnesium‐Iron Composites by Topological OptimizationRare Metals, 2026
- Mechanical enhancement and strengthening mechanisms of ultrasonically processed AZ91/ZrC nanoparticle compositesInteractions, 2026
- Investigating stir casting process parameters for ZrO₂ reinforced magnesium alloy using backpropagation algorithmInteractions, 2026
- Preparation of a bimodal grain-structured 0.4GNPs/Mg-8Al-1Sm composites via adjusting the extrusion temperatureJournal of Materials Science, 2025
- The influence of SiC–Al2O3 reinforcements on the deformation and fracture mechanism of thixomolded Mg-based compositeJournal of Materials Science, 2024
- Substructure Hardening and Twinning Suppression in Graphene Oxide‐Reinforced Magnesium NanocompositesAdvanced Engineering Materials, 2023
- Study on the Fine Grain Size and Microhardness at the Interface of AZ31/Mg‐Y CompositesAdvanced Engineering Materials, 2021
- On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix compositesJournal of Materials Science, 2020
- Factor analysis of key parameters on cutting force in micromachining of graphene-reinforced magnesium matrix nanocomposites based on FE simulationThe International Journal of Advanced Manufacturing Technology, 2017