Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles
Open Access
- 7 December 2023
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 36 (7) , e2308294
Abstract
The powder aerosol deposition (PAD) method is a process to manufacture ceramic films completely at room temperature. Since the first reports by Akedo in the late 1990s, much research has been conducted to reveal the exact mechanism of the deposition process. However, it is still not fully understood. This work tackles this challenge using core–shell particles. Two coated oxides, Al2O3 core with a SiO2 shell and LiNi0.6Mn0.2Co0.2O2 core with a LiNbO3 shell, are investigated. Initially, the element ratios Al:Si and Ni:Nb of the powder are determined by energy‐dispersive X‐ray spectroscopy (EDX). In a second step, the change in the element ratios of Al:Si and Ni:Nb after deposition is investigated. The element ratios from powder to film strongly shift toward the shell elements, indicating that the particles fracture and only the outer parts of the particles are deposited. In the last step, this work investigates cross‐sections of the deposited films with scanning transmission electron microscopy (STEM combined with EDX and an energy‐selective back‐scattered electron (EsB) detector to unveil the element distribution within the film itself. Therefore, the following overall picture emerges: particles impact on the substrate or on previously deposited particle, fracture, and only a small part of the impacting particles that originate from the outer part of the impacting particle gets deposited.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03XP0441A, 03XP0433A)
- Deutsche Forschungsgemeinschaft (MO 1060/40‐1)
This publication has 53 references indexed in Scilit:
- Effect of Process Gas Flow on the Coating Microstructure and Mechanical Properties of Vacuum Kinetic-Sprayed TiN LayersJournal of Thermal Spray Technology, 2013
- Corrosion Protection Performance of YSZ Coating on AA7075 Aluminum Alloy Prepared by Aerosol DepositionJournal of the Electrochemical Society, 2012
- Growth Process of α‐Al2O3 Ceramic Films on Metal Substrates Fabricated at Room Temperature by Aerosol DepositionJournal of the American Ceramic Society, 2011
- Resistive Oxygen Gas Sensors for Harsh EnvironmentsSensors, 2011
- Lee Al2O3 Films on Cu Substrates Using the Aerosol Deposition MethodJournal of the Korean Physical Society, 2010
- Effects of Pretreatments on Deposition Rate of Films in Aerosol Deposition MethodKey Engineering Materials, 2009
- Aerosol Deposition of Ceramic Thick Films at Room Temperature: Densification Mechanism of Ceramic LayersJournal of the American Ceramic Society, 2006
- Atomistic Simulation of the Aerosol Deposition Method with Zirconia NanoparticlesMATERIALS TRANSACTIONS, 2006
- Molecular Dynamics Simulation on the Single Particle Impacts in the Aerosol Deposition ProcessMATERIALS TRANSACTIONS, 2005
- A low-viscosity epoxy resin embedding medium for electron microscopyJournal of Ultrastructure Research, 1969