Properties of Light Cementitious Composite Materials with Waste Wood Chips
Open Access
Abstract
The CO2 emissions from the cement industry and the production of waste wood chips are increasing with the rapid growth of the construction industry. In order to develop a green environmental protection building material with low thermal conductivity and up to standard mechanical properties, in this study, pine waste wood chips were mixed into cement-based materials as fine aggregate, and three different kinds of cementitious binders were used, including sulfur aluminate cement (SAC), ordinary Portland cement (OPC), and granulated blast furnace slag (GBFS), to prepare a recycled light cementitious composite material. The mechanical, thermal conductivity, shrinkage, water absorption, and pore structure of a wood chip light cementitious composite material were studied by changing the Ch/B (the mass ratio of wood chip to binder). The results showed that the strength, dry density, and thermal conductivity of the specimens decreased significantly with the increase in the Ch/B, while the shrinkage, water absorption, and pore size increased with the increase in the Ch/B. By comparing three different kinds of cementitious binders, the dry density of the material prepared with OPC was 942 kg/m3, the compressive strength of the material prepared with SAC was 13.5 MPa, and the thermal conductivity of the material prepared with slag was the lowest at 0.15 W/m/K. From the perspective of low-cost and low-carbon emissions, it was determined that the best way to prepare a light cementitious composite with waste wood chips is to use granulated blast furnace slag (GBFS) as the cementitious binder.Keywords
Funding Information
- National Natural Science Foundation of China (51878366, 51978353, 52078261)
- Natural Science Foundation of Shandong Province (ZR2019PEE007, ZR2020ME036)
- Municipal School Enterprise Cooperation Project (2422243, 2421073, 2419133)
- Qingdao Municipal Government Procurement Project (ZFCG2019000063, ZFCG2022007092)
- Qingdao science and technology demonstration and guidance project (20-3-4-10-nsh)
This publication has 33 references indexed in Scilit:
- Eco-friendly self-compacting cement pastes incorporating wood waste as cement replacement: A feasibility studyJournal of Cleaner Production, 2018
- Effect of Alkaline and Hot Water Treatments on the Structure and Morphology of Piassava FibersMaterials Research, 2018
- Optimizing mortar extrusion using poplar wood sawdust for masonry building blockThe International Journal of Advanced Manufacturing Technology, 2017
- The influence of admixture on chloride time-varying diffusivity and microstructure of concrete by low-field NMROcean Engineering, 2017
- Characterization of lightweight mortars containing wood processing by-products wasteConstruction and Building Materials, 2016
- Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood fillerConstruction and Building Materials, 2016
- Fresh properties, mechanical strength and microstructure of fly ash geopolymer paste reinforced with sawdustConstruction and Building Materials, 2016
- Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parametersJournal of Advanced Research, 2015
- Properties of a lightweight cement composite with an ecological organic fillerConstruction and Building Materials, 2014
- Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A ReviewJournal of Polymers and the Environment, 2007