Towards a Holistic Approach to Inverter-Fed Machine Design: FEM-Based PDIV Prediction of Complete Windings
- 16 June 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 30 (6) , 2870-2877
Abstract
The Schumann inception criterion was used to predict the partial discharge inception voltage of insulation models representing both wire wound and form wound (hairpin) low voltage machines. It was found that the fitting parameter K (the logarithm of the critical number of electrons that define the transition from Townsend to streamer discharge) is almost independent of material parameters when dealing with a given type of insulation (e.g., turn-to-turn using round conductors or flat conductors). These numbers can be fed to software for finite element analysis to provide a worst-case estimate of the partial discharge inception voltage.Keywords
Funding Information
- European Union’s Horizon Europe Research and Innovation Programme under HEFT project (101096306)
- European Commission
This publication has 15 references indexed in Scilit:
- Insulation design of low voltage electrical motors fed by PWM invertersIEEE Electrical Insulation Magazine, 2019
- The Impact of Test Voltage Waveform in Determining the Repetitive Partial Discharge Inception Voltage of Type I Turn/Turn Insulation Used in Inverter-Fed Induction Motors2018
- Power Up with 800-V Systems: The benefits of upgrading voltage power for battery-electric passenger vehiclesIEEE Electrification Magazine, 2017
- Solving the Boltzmann equation to obtain electron transport coefficients and rate coefficients for fluid modelsPlasma Sources Science and Technology, 2005
- An overvoltage suppression scheme for AC motor drives using a half DC-link voltage level at each PWM transitionIEEE Transactions on Industrial Electronics, 2002
- Inverter-Fed Drives: Which Motor Stators Are at Risk?IEEE Industry Applications Magazine, 2000
- Electrical stress and failure mechanism of the winding insulation in PWM-inverter-fed low-voltage induction motorsIEEE Transactions on Industrial Electronics, 2000
- Failure mechanism of winding insulations in inverter-fed motorsIEEE Electrical Insulation Magazine, 1997
- Effect of electric discharges on the breakdown of solid insulationElectrical Engineering, 1954
- Über das Minimum der Durchbruchfeldstärke bei KugelelektrodenElectrical Engineering, 1923