Comparison of Different Omnidirectional Sound Sources with the Validation of Coupled Speakers as a Measurement Source for Room Acoustics
Open Access
- 7 December 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (24) , 13058
Abstract
Omnidirectional sources used in room acoustics usually take the form of multi-speaker sources. Few alternatives for the most commonly used dodecahedral sound source have been derived recently. The project aimed to measure room acoustic parameters using three different sound sources: a dodecahedron, a cube, and a new source of two coupled loudspeakers. The measurements were made by rotating the sources every 15 degrees. The differences in the EDT, T30, D50, and C80 parameters in the function of the rotation angle of the sources were analyzed. Statistical analysis was carried out to examine the sensitivity of the measured parameters’ JND (just a noticeable difference) on the source’s rotation angle. This presentation will show the results and analysis of measurements showing the influence of the used source on obtained parameters and the validation of coupled speakers’ use. A comprehensive discussion of the results obtained with different sources (coupled, dodecahedral, cubic) will be provided. The results confirmed using the coupled speakers as an alternative for omnidirectional sound source in the range of 250–2000 Hz.Keywords
This publication has 23 references indexed in Scilit:
- The Acoustics of the CatacombsArchives of Acoustics, 2015
- The acoustics of the cavesApplied Acoustics, 2014
- An analytical model for a dodecahedron loudspeaker applied to the design of omni-directional loudspeaker arraysApplied Acoustics, 2014
- Point Source Loudspeaker Design: Advances on the Inverse Horn ApproachJournal of the Audio Engineering Society, 2014
- Influence of “omnidirectional” loudspeaker directivity on measured room impulse responsesThe Journal of the Acoustical Society of America, 2013
- Optimizing stepwise rotation of dodecahedron sound source to improve the accuracy of room acoustic measuresThe Journal of the Acoustical Society of America, 2013
- Impulse source versus dodecahedral loudspeaker for measuring parameters derived from the impulse response in room acousticsThe Journal of the Acoustical Society of America, 2013
- A simple impulse sound source for measurements in room acousticsApplied Acoustics, 2007
- An experimental evaluation of regular polyhedron loudspeakers as omnidirectional sources of soundThe Journal of the Acoustical Society of America, 2006
- ACOUSTIC MEASUREMENTS IN OPERA HOUSES: COMPARISON BETWEEN DIFFERENT TECHNIQUES AND EQUIPMENTJournal of Sound and Vibration, 2000