Protection of the plasma facing components in the WEST tokamak, progress and development in view of ITER
Open Access
- 16 December 2024
- journal article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (1) , 016059
Abstract
The protection of the inner walls of magnetic confinement fusion research reactors is a crucial issue, particularly in this research context where plasma scenarios are explored to reach high power performance, thus leading to high temperature of the plasma facing components (PFCs), possibly close to their technological limitation. The aim is to protect the PFCs from damage during experimental campaigns, whilst enabling the expansion of the operational domain toward long duration and high power performances. With nearly 35 years of operation of Tore Supra and now WEST, CEA’s magnetic fusion research institute, the IRFM, has deployed a system combining thermal instrumentation, modeling of the heat transfer and photonic emission, signal processing and understanding of the physics of plasma-wall interaction to provide an optimized and controlled protection of the PFCs in metallic environment (with tungsten, bore, copper and stainless steel materials). In this context, the WEST Tokamak is a relevant Fusion facility capable of combining steady-state (Vloop ∼ 0) 1000 s long pulse operation with up to 6 MW m−2 on its divertor together with an advanced first wall protection system that could be deployed on ITER and future Fusion machines. The paper describes the wall protection system installed on WEST, highlighting its particular features and recent results.Keywords
This publication has 21 references indexed in Scilit:
- Software platform for imaging diagnostic exploitation applied to edge plasma physics and real-time PFC monitoringFusion Engineering and Design, 2023
- Very High spatial Resolution IR thermography diagnostic positioning system upgrade in WEST TokamakFusion Engineering and Design, 2023
- Calibration methods and uncertainties estimation of WEST infrared thermography diagnosticsFusion Engineering and Design, 2023
- The wide-angle infrared diagnostic for the first wall monitoring of the WEST tokamakFusion Engineering and Design, 2022
- Interpretation of temperature distribution observed on W-ITER-like PFUs in WEST monitored with a very-high-resolution IR systemFusion Engineering and Design, 2021
- WEST operation with real time feed back control based on wall component temperature toward machine protection in a steady state tungsten environmentFusion Engineering and Design, 2021
- Overview of optical designs of the port-plug components for the ITER Equatorial Wide Angle Viewing System (WAVS)Fusion Engineering and Design, 2019
- Full coverage infrared thermography diagnostic for WEST machine protectionFusion Engineering and Design, 2019
- The very high spatial resolution infrared thermography on ITER-like tungsten monoblocks in WEST TokamakFusion Engineering and Design, 2019
- Design optimization of the ITER tungsten divertor vertical targetsFusion Engineering and Design, 2018