MAMarie-Hélène Aumeunier

Marie-Hélène Aumeunier

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marie-Hélène Aumeunier has a total of 417 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    WEST advanced wall protection achievements toward long pulse operation

    by R. Mitteau, M.H. Aumeunier, L. Dubus, J. Gerardin, V. Gorse, E. Grelier, V. Moncada, S. Vives, X. Litaudon, M. Jakubowski, et al.

    Long pulse operation in magnetic fusion devices requires well controlled plasma power exhaust to the divertor & wall, and avoidance of wall hot spots that could evolve in wall damage. At WEST, 10 major plasma facing components are monitored using 10 series of temperature/power indicators, based on multiple diagnostic systems, among which the infrared viewing system is especially relevant. These indicators span from the most basic ones (temperatures, power and energy from deterministic models) to advanced processes using artificial intelligence acquired through machine learning. Some advanced processes do operate in real time, and feedback on power actuators through the plasma control system, providing active control toward remaining within the safe operational domain. Other advanced processes intervene as forensic tools post discharge to identify possible dangerous situations regarding the power loading to the wall, so that the discharge run plan is adjusted to avoid running into aggravating wall events. No critical wall power event happened during the campaigns C9 to C11 (2024–2025), totalling about 13 h of plasma, that would have affected the campaign plan. While it cannot be demonstrated that the active & intelligent wall protection enabled the new plasma duration record of 1337 s, the wall protection system as a whole plausibly contributed to obtaining these record durations by preventing wall hot spots to become critical during the campaigns.


  • Design and development of plasma diagnostics to tackle the Divertor Tokamak Test research objectives (invited)

    by F. Bagnato, C. Centioli, L. Gabellieri, G. Artaserse, A. Fassina, D. Fiorucci, M. Iafrati, D. Marocco, A. Murari, S. Palomba, et al.

    The Divertor Tokamak Test (DTT) is a compact sized (R = 2.19 m, a = 0.70 m) fully superconducting tokamak presently under construction at the ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic Development) research center in Frascati, Italy. With its high field (B = 5.85 T) and plasma current (Ip = 5.5 MA), actively cooled in-vessel W components to sustain long pulse duration (tpulse = 100 s), and a significant amount of external heating power (up to P = 45 MW to the plasma), it aims at exploring heat exhaust solutions in fusion-relevant environments by reproducing the level of divertor heat loads expected in ITER and DEMO. Recently, a first version of the DTT research plan was released, defining the project objectives and describing targeted plasma scenarios. The research plan also sets the basis for the development of diagnostic systems, closely following the experimental phases of the machine therein described, with a particular focus toward the divertor region. Since DTT’s first plasma will soon be followed by an experimental phase, operations will start with a full set of systems for machine protection and plasma control, as well as diagnostics to probe initial scenarios. Advanced systems for the investigation of the physics of transport and fast particles will be developed and installed as the machine performance evolves, following its power upgrades. This paper gives an overview of the DTT tokamak targeted diagnostic set, focusing on how these systems are designed to address the scientific goals of the project from first plasma to full power scenarios, and providing context for further publications dedicated to specific diagnostic systems.

  • Open Access

    Testing tungsten plasma facing components in WEST and AUG tokamaks

    by Yann Corre, Marie-Helene Aumeunier, Jerome B Bucalossi, Mathilde Diez, Alan Durif, Annika Ekedahl, Nicolas Fedorczak, Mehdi Firdaouss, Eric Gauthier, Jonathan Gerardin, et al.

    Next step fusion devices will face unprecedented heat loads and particle fluence with thousands of hours of plasma exposure on plasma-facing components (PFC) cumulated over the entire lifetime of the device. These components must guarantee acceptable lifetime, reliable heat exhaust capabilities (10-15 MW/m2 power fluxes in steady state) and a high level of resilience after multiple thermal stresses generated by combined steady-state heat loads and transient events, such as ELMs or disruptions. An extensive tungsten (W) PFC testing work-program has been conducted in the WEST (Tungsten Environment in Steady State Tokamak) and ASDEX Upgrade (AUG) tokamaks, taking advantage of key capabilities and strengths of the two machines. WEST is a superconducting tokamak with long pulse duration capabilities currently equipped with an ITER-grade actively cooled divertor, including shaped monoblocks (MB) with the 0.5 mm height toroidal bevel as foreseen for ITER, while AUG allows the exposure of dedicated tile-sized samples (with different geometries, gap size, slopes and materials) in ELMy H-mode discharges using its divertor manipulator DIM-II system. The first part of the paper reports on the operation of the ITER-grade PFC in WEST since the commissioning of the divertor in 2022. The second part of the paper presents dedicated experiments performed in AUG and WEST in order to study W failure modes, W melting across toroidal gaps (during sustained or transient melting) and impact of the runaway electrons on W material. The results reported here provide new information on W material response (e.g. heating, cracking or melting) of direct relevance to ITER.


  • Open Access

    Optical and radiative characterization of WEST post-mortem samples

    by Florent Retailleau, Marie-Hélène Aumeunier, Sanah Hussain, Laurent Marot

  • Open Access

    Diagnostics: Chapter 8 of the special issue: on the path to tokamak burning plasma operation

    by D. Mazon, G. Vayakis, M. Walsh, G. Yun, S.-H. Hong, B. Peterson, M.H. Aumeunier, A. Bultel, C. Klepper, D. Rasmussen, et al.

    This chapter presents the activity conducted by the ITPA topical group (TG) on Diagnostics over about the last 15 years. Following a general introduction of the ITER Diagnostics led by their measurement roles, the document is organized in several subchapters detailing the design support, research and development activity conducted by each of the specialist working groups (WGs) of the TG. Please note that the magnetic diagnostics were supported at the TG without a specific WG. Their status is included in the general introduction. In the following some highlights of the subchapter’s contents are provided. Recent advances in ITER first wall (FW) diagnostics for the measurements of plasma-metallic wall interaction in support of the ITER research plan are reported. An InfraRed imaging Video Bolometer for ITER has been developed and tested on several tokamaks to measure the radiated power loss. A laser-induced breakdown spectroscopy (LIBS) technique which utilizes a pulsed laser beam to ablate locally by forming a crater, will measure local tritium inventory in the FW material. Real-time Residual Gas Analyzers will measure the neutral gas composition in a divertor port and an equatorial port during plasma operation. Due to the full metallic FW environment, the plasma-wall interaction in ITER will face several challenges such as the compromised radiated power and divertor heat flux measurements by reflection. Ray tracing and analysis codes have been developed to eliminate and correct the effects of reflection in the measurements. The characteristics of the reflecting surfaces depending on the roughness and angle of the incidence have been measured by dedicated experiments, and the results were applied to the reflection elimination. For the measurement of the metallic impurity radiation induced by eroded metallic atoms, a vacuum ultraviolet spectrometer has been developed and tested. An extensive thermonuclear diagnostic suite will be required to support the operation of ITER and the planned experimental program for future burning plasma experiments. Due to the harsh environmental conditions, the implementation of diagnostic systems in ITER is a major challenge. These conditions include high levels of neutron and gamma fluxes, neutron heating, particle bombardment. Therefore, the selection and design of diagnostic systems must take into account a number of phenomena previously unseen in diagnostic design. For this reason, the measurement of neutrons and confined or lost fast ions, with particular emphasis on alpha particles, is critical to ITER. The diagnostics associated with these measurements will be important for future plasma-burning experiments at ITER. The high neutron emission and very large plasma size in ITER make neutron diagnostics the main diagnostic method used to measure plasma parameters such as fusion power, fusion power density, ion temperature, energy of fast ions and their spatial distributions in the plasma core. Active spectroscopy techniques are methods where a neutral particle beam is injected into the plasma and information on plasma parameters is extracted from the measurement of line emission resulting from the beam-plasma interaction, either by plasma ions or by beam atoms. Spatial localization is achieved by crossing the beamline and multiple observation lines. The ITER plasma will be a high temperature, moderately dense, fully ionized collisional plasma. The plasma facing surfaces are principally metallic being fashioned from beryllium or tungsten but many other elements, arising from either structural or from operational needs, may enter this plasma. The energy range of the emitted photons range from meV (infra-red) to multi keV (x-rays) and originate from all areas of the plasma volume. The primary role of passive emission diagnostics is to identify what is in the plasma from spectral signatures. Extracting quantitative information from these measurements such as impurity content, ion temperature, rotation, degree of detachment and radiated power depends on calibrated instruments, a physics model of the atomic and molecular processes and plasma transport and an analysis workflow that takes into account environmental effects such as reflections. The particular needs for ITER have prompted a multi-machine, many-year effort to address all these aspects and this chapter reviews the work on diagnostic design, experiments and new analysis techniques. An overview of the laser diagnostics to be implemented on ITER is also provided in this paper. This includes descriptions of the Thomson scattering in the core, edge and divertor regions, polarimetry and interferometry diagnostics used for measuring plasma density and also measurements of helium density in the divertor using Laser Induced Flourescence. Techniques which can allow improvements on current measurements are also addressed in particular expanding poloidal polarimetry measurements to measure field fluctuations and proposed use of dispersion interferometery which has a number of advantages over existing methods. This paper identifies particular areas where further research and testing on existing tokamaks is useful even at this advanced stage to inform the design of diagnostics for ITER. Outstanding areas of concern for the implementation of laser diagnostics, in particular with a view to reliable operation are identified. An overview of the latest developments of microwave diagnostic systems and techniques is given. The primary focus is the contributions for ITER—the next step burning plasma experiment—which is supplemented by describing recent progress of techniques applicable for fusion experiments beyond ITER. The contributions are intentionally kept concise, and are being supplemented by a rich list of references for further studies. Radiation induced effects are receiving continuous and well-deserved attention of the ITER diagnostic community and they are in many cases one of the primary design drivers of the ITER diagnostic systems. The paper summarizes recent progress in this area focusing primarily on the ITER diagnostics but in some cases provides also outlook for the possible solutions for even more demanding radiation environment of fusion reactors beyond ITER. Despite advancements in the area of modeling and simulation of various radiation induced effects, experimental testing in a nuclear environment as close as possible to the target one is still seen as unavoidable for proper qualification of particular diagnostic functional elements. Recent advancement within three diagnostic areas: optical diagnostics, magnetics and bolometers is covered. Encouraging results on qualification of silica glass vacuum window assemblies are presented. In the area of magnetic sensors, progress of irradiation tests performed on ITER in-vessel LTCC inductive sensors is presented with outlook for novel technological approaches to inductive sensors utilizing thick printing and photolithography technologies being highlighted. Summary of advancements in the area of steady state magnetic field sensors based on Hall effect is given. New results of neutron irradiation test of the ITER borosilicate glass inserts for vacuum electrical feedthroughs are summarized finding negligible swelling at target level of neutron fluence. Off-line irradiation tests of fiber optic current sensors for plasma current measurement demonstrated that both for gamma doses up to 5 MGy and a total neutron fluence up to 1015 cm−2, radiation induced changes are still compatible with required measurement accuracy on ITER. The ITER bolometers are given as an example how considering radiation effects may influence the diagnostic design. Finally, outlook for future main R&D directions is outlined. All optical and laser-based diagnostics in ITER will be using mirrors to guide plasma radiation toward detectors, cameras and sensors. In the hostile plasma, radiation and particle environment the optical characteristics of diagnostic mirrors will degrade directly affecting the entire performance of involved diagnostic systems. An assessment of factors affecting mirror performance is provided. Among the prime adverse factors are deposition of plasma impurities, sputtering of mirror surface and steam ingress in the vicinity of mirrors. Within the International Tokamak Physics Activity with active support by ITER central team and domestic agencies, the structured research and development (R&D) program on mitigation of risks for diagnostic mirrors is underway. Within this program the mirror material development, the passive mitigation of mirror degradation by using diagnostic ducts and shutters along with an active mirror recovery program comprising the in-situ mirror cleaning and calibration is underway. Recent developments in diagnostic mirror R&D are described in this Chapter along with an example of their implementation of R&D solutions in ITER Infrared Thermography diagnostic. An assessment of still open engineering and physics questions, considerations on mirror risks during an early phase of ITER operation are given along with an overview of diagnostic mirror evolution in the late ITER operation stage toward the demonstration fusion power plant. Several crucial areas of diagnostic R&D outlined in ITER Research Plan are addressed. The basic control groups in a fusion reactor can be broken-down in five categories: (1) plasma position, magnetic configuration, and plasma current control, (2) profile control and confinement optimization, (3) MHD control and suppression, (4) edge dissipation control, radiation and plasma exhaust control and (5) break-down optimization. These categories are coupled via the physics (a control action in one domain will affect the other domains) and via shared actuators (e.g. ECRH for impurity accumulation avoidance, current density distribution control and MHD suppression). Consequently, a supervisory control system should determine the priority of the various control tasks, their couplings, and the interfaces with the safety and interlock system. For the systematic development of the various controllers taking the complexity of the plasma and the control system into account, a model-based approach is required. A short historical overview is given of the developments in systems and control theory and control engineering with special emphasis on those developments that are most relevant for Nuclear Fusion research and operation. An overview is given of the state of the field of fusion plasma control for the control categories. It will be shown how synthetic diagnostics are being developed in ITER and how they are used in diagnostic design and design validation and how they can be in model-based controller synthesis using relatively simple models. In modern control methods, multiple diagnostics are used to constrain relatively simple models. The constrained models provide an estimate for the state. This opens the route to state controllers, such as model predictive control. A major challenge in nuclear fusion research is the coherent combination of data from heterogeneous diagnostics and modeling codes for machine control and safety as well as physics studies. Measured data from different diagnostics often provide information about the same subset of physical parameters. Additionally, information provided by some diagnostics might be needed for the analysis of other diagnostics. A joint analysis of complementary and redundant data allows, e.g. to improve the reliability of parameter estimation, to increase the spatial and temporal resolution of profiles, to obtain synergistic effects, to consider diagnostics interdependencies and to find and resolve data inconsistencies. Physics-based modeling and parameter relationships provide additional information improving the treatment of ill-posed inversion problems. A coherent combination of all kind of available information within a probabilistic framework allows for improved data analysis results. The concept of integrated data analysis (IDA) in the framework of Bayesian probability theory is outlined and contrasted with conventional data analysis. Components of the probabilistic approach are summarized and specific ingredients beneficial for data analysis at fusion devices are discussed.


  • BRDF determination based on topography measurement and Monte Carlo ray tracing

    by Florent Retailleau, Marie-Hélène Aumenier, Laurent Marot


  • Open Access

    Prediction and evaluation of measurement performances of imaging diagnostics for ITER wall protection

    by Marie-Helene Aumeunier, Alexis Juven, Priyanka Jena, Vincent Martin, Martin Kocan

  • Open Access

    Protection of the plasma facing components in the WEST tokamak, progress and development in view of ITER

    by M. Houry, M-H. Aumeunier, Y. Corre, X. Courtois, R. Mitteau, Th. Loarer, L. Dubus, E. Gauthier, J. Gerardin, V. Gorse, et al.

    The protection of the inner walls of magnetic confinement fusion research reactors is a crucial issue, particularly in this research context where plasma scenarios are explored to reach high power performance, thus leading to high temperature of the plasma facing components (PFCs), possibly close to their technological limitation. The aim is to protect the PFCs from damage during experimental campaigns, whilst enabling the expansion of the operational domain toward long duration and high power performances. With nearly 35 years of operation of Tore Supra and now WEST, CEA’s magnetic fusion research institute, the IRFM, has deployed a system combining thermal instrumentation, modeling of the heat transfer and photonic emission, signal processing and understanding of the physics of plasma-wall interaction to provide an optimized and controlled protection of the PFCs in metallic environment (with tungsten, bore, copper and stainless steel materials). In this context, the WEST Tokamak is a relevant Fusion facility capable of combining steady-state (Vloop ∼ 0) 1000 s long pulse operation with up to 6 MW m−2 on its divertor together with an advanced first wall protection system that could be deployed on ITER and future Fusion machines. The paper describes the wall protection system installed on WEST, highlighting its particular features and recent results.


  • Design, justification, and prototyping of the visible and infrared wide angle viewing system diagnostic for ITER equatorial port 12

    by S. Vives, C. Guillon, L. Letellier, M. H. Aumeunier, X. Courtois, S. Garitta, J. Grosy, N. Lapcevic, N. Lefevre, B. Peluso, et al.

    The ITER equatorial visible and infrared Wide Angle Viewing System (WAVS) will play a major role in the protection of plasma facing components by providing surface temperature measurements of these components. It will also image the plasma emission in the visible range. The WAVS is composed of 15 lines of sight located in four Equatorial Ports (EPs) 3, 9, 12, and 17. Its development is being carried out by the Consortium constituted by CEA, CIEMAT, INTA, and Bertin Technologies, within grant contracts financed by F4E. In the EP12, the in-vessel and ex-vessel components of the WAVS are at their final design phase. This article presents an overview of the opto-mechanical design of the WAVS in the EP12 presented at the final design review.


  • Open Access

    First Wall Heat Load Control Design for ITER With a Model-Based Approach

    by Federico Pesamosca, Timo Ravensbergen, Richard A. Pitts, Peter de Vries, Luca Zabeo, Luigi Pangione, Ivo S. Carvalho, Marie-Hélène Aumeunier, Matic Brank, Massimiliano Mattei, et al.

    The design of real time heat load protection functions for the ITER tokamak first wall (FW) plasma-facing components (PFCs) requires the development of simplified, but reliable control-oriented models. The dynamics of interest in this case encompasses slow changes in plasma shape or transient increases in wall power loading. For this purpose, this study presents a new lightweight framework for simulating the FW thermal response during a plasma discharge, validated against higher fidelity codes and developed in a MATLAB/Simulink environment specifically for rapid prototyping and testing of control schemes. This innovative tool allows the ITER FW heat load controller to be designed in the plasma control system simulation platform (PCSSP) following a model-based approach, where a dynamical model of the physical process to control is an integral part of the controller synthesis procedure.