Microstructural Investigation on Heat Treatment of Hypoeutectic High Chromium White Cast Irons
Open Access
- 1 March 2020
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1495 (1) , 012024
Abstract
High chromium white cast irons (HCWCI) are widely used as abrasion resistant materials in cement manufacturing, mineral processing and slurry pumping industries. Their high resistance to wear in these demanding situations stems from the presence of hard eutectic (Cr, Fe)7C3 carbides in their microstructures. In this context, the properties of hypoeutectic iron of HCWCI containing 25 wt. %Cr-2.5 wt. %C were investigated after destabilisation heat treatments, cooling (slow and fast cooling) to ambient temperatures, their influence on the microstructure was investigated. For characterization of the hypoeutectic iron of HCWCI, several experimental tests were performed using the following laboratory equipment: light optical microscope, scanning electron microscope. The amount of retained austenite also depends on the alloying additions in the melt during melting processes, destabilisation temperatures, soaking time and the cooling rates during heat treatment processes.Keywords
This publication has 17 references indexed in Scilit:
- Microstructural Comparison of Spray-Formed and Conventionally Cast 2.5C–19Cr High-Chromium White IronMetallography, Microstructure, and Analysis, 2015
- Microstructure and mechanical properties of Fe–Cr–C–Nb white cast ironsMaterials & Design (1980-2015), 2013
- The Microstructure and Abrasive Wear Resistance of Fe–Cr–C Hardfacing Alloys with the Composition of Hypoeutectic, Eutectic, and Hypereutectic at $ \frac{Cr}{C} = 6 $Tribology Letters, 2011
- Microstructure and mechanical properties of high boron white cast iron with about 4 wt% chromiumJournal of Materials Science, 2010
- Microstructure and properties of high chromium cast irons: effect of heat treatments and alloying additionsInternational Journal of Cast Metals Research, 2009
- Investigation of effects of boron additives and heat treatment on carbides and phase transition of highly alloyed duplex cast ironMaterials & Design (1980-2015), 2009
- Effect of heat treatment on microstructure and mechanical properties of a Ti-bearing hypereutectic high chromium white cast ironMaterials Science and Engineering: A, 2008
- Measurement of residual stresses in cast aluminium engine blocksJournal of Materials Processing Technology, 2007
- The effect of heat treatment on the toughness, hardness and microstructure of low carbon white cast ironsJournal of Materials Science, 2001
- On the nature of eutectic carbides in Cr-Ni white cast ironsMetallurgical Transactions A, 1991