Spiraphase-type leaky-wave structure
- 8 March 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 31 (6) , 561-576
Abstract
A leaky-wave structure (LWS) based on two stacked spiraphase-type reflectarrays (RAs) is analysed in this paper. Each RA contains capacitively loaded ring slot elements arranged at the nodes of a square periodic grid. The proposed LWS performs frequency scanning of a conical beam by changing the cone aperture angle 2θ0. Furthermore, the reconfiguration of the radiation pattern can be achieved by rotating the RA elements. Four Ka-band LWSs with different angular positions of the capacitive loads at the top RA were designed, fabricated and tested to demonstrate the pattern reconfiguration capability. A full-wave mathematical model was used to optimize the reflectarray elements and a simplified mathematical model was developed to predict the radiation characteristics of the whole structure. It was experimentally proven that frequency sweep from 36.37 to 39.9 GHz leads to the change of the angle θ0 from 0° to 38°. The increment of θ0 from 0° to 23° at 36.4 GHz was observed, when the reactive loads of the ring-slot elements at the top RA were rotated on the angle 18°. Good agreement between theoretical predictions and measurements was observed.Keywords
Funding Information
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN114116, IN115016, IN116517, IN117814)
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN114116)
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN117814)
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN115016)
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN116517)
- CONACyT (166106)
This publication has 32 references indexed in Scilit:
- Gain Enhancement of a V-Band Antenna Using a Fabry-Pérot Cavity With a Self-Sustained All-Metal Cap With FSSIEEE Transactions on Antennas and Propagation, 2014
- Reconfigurable Terahertz Leaky-Wave Antenna Using Graphene-Based High-Impedance SurfaceIEEE Transactions on Nanotechnology, 2014
- MEMS-Tunable Half Phase Gradient Partially Reflective Surface for Beam-ShapingIEEE Transactions on Antennas and Propagation, 2014
- Multilayer Partially Reflective Surfaces for Broadband Fabry-Perot Cavity AntennasIEEE Transactions on Antennas and Propagation, 2014
- DESIGN OF SUBWAVELENGTH TUNABLE AND STEERABLE FABRY-PEROT/LEAKY WAVE ANTENNASProgress In Electromagnetics Research, 2011
- Fundamental Properties and Optimization of Broadside Radiation From Uniform Leaky-Wave AntennasIEEE Transactions on Antennas and Propagation, 2006
- A Metallic Fabry–Perot Directive AntennaIEEE Transactions on Antennas and Propagation, 2006
- Spiraphase-Type Reflectarrays Based on Loaded Ring Slot ResonatorsIEEE Transactions on Antennas and Propagation, 2004
- Element suitability for circularly polarised phase agile reflectarray applicationsIEE Proceedings - Microwaves, Antennas and Propagation, 2004
- Ka-band reflectarray using ring elementsElectronics Letters, 2003