Lithography-Based Ceramic Manufacturing of Diamond Lattice Structure for Bone Regeneration Scaffolds
Open Access
- 14 April 2026
- conference paper
- Published by MDPI AG in Materials Proceedings
- Vol. 31 (1) , 4
Abstract
This study investigates the mechanical and biological properties of diamond lattice structure produced through lithography-based ceramic manufacturing, an additive manufacturing technique. HA480 specimens, cubes of 5 × 5 × 5 mm, were manufactured with appropriate pore sizes and porosity. Printed HA480 specimens were tested and analysed for compression strength, cell proliferation, and cell attachment. The printed cubes displayed interconnected pore geometry. A set of ten HA480 diamond lattice structure specimens were compressed until failure to obtain a compressive strength of 10.7 MPa. HA480 solid scaffolds were seeded with the human osteoblast cell line hFOB 1.19 cells. The fluorescence level results were higher on day 3 and decreased on days 5 and 7. Cell attachment was observed from day 1 to day 7. In this study, biodegradation was also evaluated with diamond lattice structure immersed in the simulated body fluid for days 1 and 7 and 28 days. The Scanning Electron Microscopy showed precipitation after 7 days immersion and evidence of apatite after 28 days on the HA480 surface. The findings provide evidence that HA480 reacts with biological fluids and can be used as a material for bone regeneration scaffold.Keywords
This publication has 47 references indexed in Scilit:
- Elastic and failure characterization of hydroxyapatite TPMS scaffolds using a combined approach of ultrasound, compression tests and micro-CT based numerical modelsActa Materialia, 2025
- Tissue Engineering in Oral and Maxillofacial Rehabilitation—Current Status and Future ProspectsCurrent Oral Health Reports, 2024
- 3D Printing of Ceramics for Modern Medical Engineering2023
- 3D printing of hierarchical porous biomimetic hydroxyapatite scaffolds: Adding concavities to the convex filamentsActa Biomaterialia, 2021
- Young’s modulus of trabecular bone at the tissue level: A reviewActa Biomaterialia, 2018
- 3D‐Plotted Beta‐Tricalcium Phosphate Scaffolds with Smaller Pore Sizes Improve In Vivo Bone Regeneration and Biomechanical Properties in a Critical‐Sized Calvarial Defect Rat ModelAdvanced Healthcare Materials, 2018
- The gene-expression and phenotypic response of hFOB 1.19 osteoblasts to surface-modified titanium and zirconiaBiomaterials, 2009
- Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradientsBiomaterials, 2007
- How useful is SBF in predicting in vivo bone bioactivity?Biomaterials, 2006
- Biodegradation and bioresorption of calcium phosphate ceramicsClinical Materials, 1993