Influence of Ni and Cr impurities on the electronic properties of Cu(In,Ga)Se2thin film solar cells
- 22 April 2014
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 23 (7) , 892-900
Abstract
Deposition of Cu(In,Ga)Se2(CIGS) thin film solar cells on metallic substrate is an attractive approach for development of low cost solar modules. However, in such devices, special care has to be taken to avoid diffusion of impurities, such as Fe, Ni, and Cr, from the substrate into the active layers. In this work, the influence of Ni and Cr impurities on the electronic properties of CIGS thin film solar cells is investigated in detail. Impurities were introduced into the CIGS layer by diffusion during the CIGS deposition process from a Ni or Cr precursor layer below the Mo electrical back contact. A high temperature and a low temperature CIGS deposition process were applied in order to correlate the changes in the photovoltaic parameters with the amount of impurities diffused into the absorber layer. Solar cells with Ni and Cr impurities show a reduction in the device performance, whereas the effect was most pronounced in Ni containing devices. The presence of deep defect levels in the absorber layer was identified with admittance spectroscopy and can be related to Ni and Cr impurities, which diffused into the CIGS layer according to secondary ion mass spectroscopy depth profiles and inductively coupled plasma mass spectrometry. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
This publication has 34 references indexed in Scilit:
- CIGS thin-film solar cells and modules on enamelled steel substratesSolar Energy Materials and Solar Cells, 2012
- Comparative atom probe study of Cu(In,Ga)Se2 thin-film solar cells deposited on soda-lime glass and mild steel substratesJournal of Applied Physics, 2011
- Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer filmsNature Materials, 2011
- Characterization of flexible thin film CIGSe solar cells grown on different metallic foil substratesEnergy Procedia, 2010
- Design of a laser-assisted tomographic atom probe at Münster UniversityReview of Scientific Instruments, 2010
- Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se2 thin film solar cellsJournal of Applied Physics, 2010
- Cu(In,Ga)Se2 solar cells on stainless-steel substrates covered with ZnO diffusion barriersSolar Energy Materials and Solar Cells, 2009
- Properties of Cu(In,Ga)Se2:Fe Thin Films For Solar CellsMRS Proceedings, 2005
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004
- Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devicesJournal of Applied Physics, 1999