Collapse Testing and Analysis of a Light-Frame Wood Garage Wall
- 1 April 2012
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 138 (4) , 492-501
Abstract
Light-frame wood (woodframe) buildings have been tested at full-scale sparingly around the world, primarily due to the cost associated with such testing and a general lack of facilities large enough to test at system level. The data from the tests that have been performed are used to help develop nonlinear time history analysis models that can predict the behavior of woodframe buildings during strong ground shaking. It is difficult to test buildings to the point of collapse because such tests can damage costly test equipment, i.e., the shake table. This paper presents the results of a dynamic collapse test on a light-frame wood garage wall and the results of a numerical model to simulate the wall behavior all the way to the collapse point. The tested wall was heavily damaged as a result of subjecting it to a ground motion recorded during the 1995 Kobe earthquake. Then, 85% of a near-fault ground motion recording from the Northridge earthquake was used, which immediately collapsed the test specimen...Keywords
This publication has 5 references indexed in Scilit:
- Seismic Evaluation and Retrofit of Asymmetric Multi-Story Wood-Frame BuildingJournal of Earthquake Engineering, 2007
- Evolutionary Parameter Hysteretic Model for Wood Shear WallsJournal of Structural Engineering, 2007
- Effects of Vertical Load and Hold-Down Anchors on the Cyclic Response of Wood Framed Shear WallsJournal of Structural Engineering, 2006
- A corotational finite element formulation for the analysis of planar beamsCommunications in Numerical Methods in Engineering, 2005
- Cyclic Analysis of Wood Shear WallsJournal of Structural Engineering, 2001