Microstructure and Mechanical Properties of alpha‐Silicon Carbide Sintered with Yttrium‐Aluminum Garnet and Silica
Authors:
- 1 February 1999
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 82 (2) , 441-444
Abstract
The effect of glassy‐phase chemistry, using Y 3 Al 5 O 12 (YAG) and SiO 2 as sintering additives, on the microstructure and mechanical properties of liquid‐phase‐sintered, and subsequently annealed, α‐SiC materials was investigated. The microstructural development of annealed materials was insensitive to changes in glass chemistry. The mechanical properties vs SiO 2 /YAG ratio curve had a maximum; i.e., there was a small glass composition range at which optimum mechanical properties were realized. The best results were obtained when the ratio was ∼0.5. The flexural strength and fracture toughness of the material were >450 MPa and >6 MPa·m 1/2 , respectively.Keywords
This publication has 21 references indexed in Scilit:
- Effect of Initial α‐Phase Content on Microstructure and Mechanical Properties of Sintered Silicon CarbideJournal of the American Ceramic Society, 1998
- Strength and fracture toughness of in situ-toughened silicon carbideJournal of Materials Science, 1997
- In Situ Toughened Silicon Carbide with Al‐B‐C AdditionsJournal of the American Ceramic Society, 1996
- Influence of Silica Content on Liquid Phase Sintering of Silicon Carbide with Yttrium-Aluminum GarnetJournal of the Ceramic Society of Japan, 1996
- Influence of Powder Characteristics on Liquid Phase Sintering of Silicon CarbideJournal of the Ceramic Society of Japan, 1995
- Toughness Properties of a Silicon Carbide with an in Situ Induced Heterogeneous Grain StructureJournal of the American Ceramic Society, 1994
- Effects of α‐Sic versus β‐Sic Starting Powders on Microstructure and Fracture Toughness of Sic Sintered with Al 2 O 3 ‐Y 2 O 3 AdditivesJournal of the American Ceramic Society, 1994
- Pressureless sintering of β-SiC with Al2O3 additionsJournal of Materials Science, 1994
- In Situ‐Toughened Silicon CarbideJournal of the American Ceramic Society, 1994
- Pressureless Sintering of SiCJournal of the American Ceramic Society, 1982