HRR-Based Calibration of an FDS Model for Office Fire Simulations Using Full-Scale Wood Crib Experiments
Open Access
- 19 June 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6909
Abstract
This study deals with the simulation of office fires by combining large-scale experiments with nine wooden cribs and a carefully calibrated computer model. It shows how real fire conditions, reaching up to 800–1000 °C, could be reproduced experimentally. The numerical model was validated by comparing HRR and temperature data with real measurements. Accuracy was assessed using error metrics to ensure that the simulation closely approximates real fire behavior. The method of determining HRR through mass loss has been used in prior studies, but those typically involved small-scale setups and limited fire loads. Unlike most approaches in the field, this research is based on a full-scale experiment involving nine wooden cribs, offering superior realism and thermal intensity. The experimental data—temperature evolution, HRR, and observed destructive effects—were used to calibrate the FDS model. The strength of the study lies in the repeatability and accuracy of the simulation, its practical relevance, and its potential to improve fire safety evaluations for office spaces.Keywords
Funding Information
- National Recovery and Resilience Plan (2031753094, 4168/30.06.2022, 14017 dated 16.09.2022)
- Development of an Innovative Center for Smart Digital Coordination (2031753094, 4168/30.06.2022, 14017 dated 16.09.2022)
- “Alexandru Ioan Cuza” Police Academy and the Ministry of Education (2031753094, 4168/30.06.2022, 14017 dated 16.09.2022)
This publication has 27 references indexed in Scilit:
- A critical analysis of the influence of architecture on the temperature field of RC structures subjected to fire using CFD and FEA modelsApplied Thermal Engineering, 2024
- Plastic breeze: Volatile organic compounds (VOCs) emitted by degrading macro- and microplastics analyzed by selected ion flow-tube mass spectrometryChemosphere, 2021
- Estimation of building ventilation on the heat release rate of fire in a roomApplied Thermal Engineering, 2017
- Positive Pressure Ventilation for fighting wind-driven high-rise fires: Simulation-based analysis and optimizationFire Safety Journal, 2017
- Evolution characteristics of fire smoke layer thickness in a mechanical ventilation tunnel with multiple point extractionApplied Thermal Engineering, 2017
- Validation of FDS for large-scale well-confined mechanically ventilated fire scenarios with emphasis on predicting ventilation system behaviorFire Safety Journal, 2013
- Calibration burning of wood crib under ISO9705 hoodJournal of Thermal Analysis and Calorimetry, 2007
- The causes of death in fire victimsForensic Science International, 1984
- The historical basis of fire resistance testing — Part IFire Technology, 1978
- Smoke and toxicity hazards of plastics in firesJournal of Hazardous Materials, 1975