PC Cable‐Stayed Bridge Main Girder Shear Lag Effects: Assessment of Single Cable Plane in Construction Stage
Open Access
- 1 January 2020
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Abstract
A model test and finite element analysis were conducted in this study to determine the distribution law of shear lag effect in the main beam section, a box girder, during the cable‐stayed bridge construction process. The experimental and theoretical results were compared in an example of loading the control section. The stress value of the cable tension area of the main beam upper edge was found to markedly change when tensiling the cable force and was accompanied by prominent shear lag effect. After a hanging basket load was applied, the main beam of certain sections showed alternating positive and negative shear lag characteristics. The shear lag distribution law in the box girder of the single‐cable‐plane prestressed concrete cable‐stayed bridge along the longitudinal direction was determined in order to observe the stress distribution of the girder. The results show that finite element analysis of the plane bar system should be conducted at different positions in the bridge under construction; the calculated shear lag coefficient of the cable force acting at the cable end of the cantilever reflects the actual force. In the beam segments between the cable forces, the shear lag coefficient determined by the ratio of the bending moment to the axial force reflects the actual stress at the cable force action point. In the midspan beam section between the action points of cable forces, the shear lag coefficient of the bending moment reflects the actual stress. The section shear lag coefficient can be obtained by linear interpolation of the beam section between the cable action point and the middle of the span.Keywords
Funding Information
- Natural Science Foundation of Liaoning Province (2019-MS-265, 2018YFC0809600, 2018YFC0809606)
This publication has 14 references indexed in Scilit:
- Nonlinear finite element study on the improvement of shear capacity in reinforced concrete T-Section beams by an alternative diagonal shear reinforcementEngineering Structures, 2016
- Determination of structural behavior of Bosporus suspension bridge considering construction stages and different soil conditionsSteel and Composite Structures, 2014
- Construction stage analysis of Humber Suspension BridgeApplied Mathematical Modelling, 2012
- Construction stage analysis of three-dimensional cable-stayed bridgesSteel and Composite Structures, 2012
- Finite Beam Element Considering Shear-Lag Effect in Box GirderJournal of Engineering Mechanics, 2010
- Stress concentration and deflection of simply supported box girder including shear lag effectSTRUCTURAL ENGINEERING AND MECHANICS, 2008
- Theoretical and experimental study on shear lag effect of partially cable-stayed bridgeJournal of Zhejiang University-SCIENCE A, 2005
- A finite segment model for shear lag analysisEngineering Structures, 2004
- Bending behaviour of corrugated web beamsJournal of Materials Processing Technology, 2004
- Theoretical Stress‐Strain Model for Confined ConcreteJournal of Structural Engineering, 1988