Static Characteristics and Energy Consumption of the Pressure-Compensated Pump
Open Access
Abstract
The motivation of this research was to assess the possibility of speed control for the selected pressure-compensated pump. Measured static characteristics of an axial piston pump with pressure compensation are presented in the paper. Based on these characteristics, the pump efficiencies are determined. The characteristics and efficiencies are determined for the different pump outlet pressures, pump speeds, relative displacements and for the different pressures set at the pressure compensator. In addition, the different methods of pump control were compared. These are displacement control, speed control and both controls. The efficiency of each control method was compared based on the determined mechanical input power at the pump drive shaft. By comparing these control methods, it was found that the combination of both control methods can achieve up to 93% savings of mechanical power in the controlled state (stand-by state). Also, the adverse effects resulting from each control method that reduces pump efficiency were defined.Keywords
Funding Information
- European Regional Development Fund in the Research Centre of Advanced Mechatronic Systems project (CZ.02.1.01/0.0/0.0/16_019/0000867, SP2024/019)
- grant SGS “Operational Properties of Fluid Mechanisms and their Mathematical Predictions” (CZ.02.1.01/0.0/0.0/16_019/0000867, SP2024/019)
This publication has 28 references indexed in Scilit:
- Capped piston: A promising design to reduce compressibility effects, pressure ripple and cavitation for high-speed and high-pressure axial piston pumpsAlexandria Engineering Journal, 2022
- Experimental Research of an Axial Piston Pump with Displaced Swash Plate Axis of Rotation2020
- Mathematical representation of pressure regulator with variable characteristicIOP Conference Series: Materials Science and Engineering, 2019
- A computational model of axial piston swashplate pumpsEnergy Procedia, 2017
- Distribution characteristics and impact on pump’s efficiency of hydro-mechanical losses of axial piston pump over wide operating rangesJournal of Central South University, 2017
- Constant pressure control of a swash plate type axial piston pump by varying both volumetric displacement and shaft speedInternational Journal of Precision Engineering and Manufacturing, 2015
- A study on the influence of surface topography on the low-speed tribological performance of port plates in axial piston pumpsWear, 2015
- Discrete optimization of a gear pump after tooth root undercutting by means of multi-valued logic treesArchives of Civil and Mechanical Engineering, 2013
- A complete analysis of axial piston pump leakage and output flow ripplesApplied Mathematical Modelling, 2012
- On the instantaneous and average piston friction of swash plate type hydraulic axial piston machinesKSME International Journal, 2004