An investigation on the mechanical and tribological properties of carbon fiber/polyimide composites at elevated temperatures
Authors:
- 5 February 2017
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (S2) , E869-E882
Abstract
Carbon fiber reinforced thermoplastic polyimide composites were prepared, and the mechanical properties and tribological behaviors at various sliding conditions were systematically investigated. The results showed that the incorporation of carbon fiber not only improves the flexural and tensile properties of polyimide but also greatly promotes the dynamic mechanical properties. Meanwhile, the introduction of carbon fiber greatly enhances the antifriction performance and wear resistance of polyimide at elevated temperatures. Notably, at high temperatures of 180 and 260°C, the composite containing 20vol% carbon fiber exhibits the lowest friction coefficients of 0.054 and 0.1 respectively, accompanied with the lowest wear rates. Moreover, the influence of applied load and sliding speed was also investigated at various temperatures. Scanning electron microscope (SEM) and optical analysis indicate that some lubricating films can be formed on the contact surfaces at high temperatures due to the softening of contact surface and the graphitization of carbon fiber, and the wear mechanism is dominant by adhesive wear. POLYM. COMPOS., 39:E869–E882, 2018. © 2017 Society of Plastics EngineersKeywords
This publication has 35 references indexed in Scilit:
- Tribological investigations of carbon nanotube‐reinforced polymer (UHMWPE) nanocomposites using Taguchi methodologyJournal of Applied Polymer Science, 2016
- Tribological behaviors of carbon series additions reinforced CF/PTFE composites at high speedJournal of Applied Polymer Science, 2016
- Tribological properties of fluorinated graphene reinforced polyimide composite coatings under different lubricated conditionsComposites Part A: Applied Science and Manufacturing, 2016
- Comparative study on the tribological properties of the polyimide composites reinforced with different fibersPolymer Composites, 2015
- Fiber hybrid polyimide‐based composites reinforced with carbon fiber and poly‐p‐phenylene benzobisthiazole fiber: Tribological behaviors under sea water lubricationPolymer Composites, 2014
- Synergism of several carbon series additions on the microstructures and tribological behaviors of polyimide-based composites under sea water lubricationMaterials & Design (1980-2015), 2014
- Properties of carbon fiber reinforced poly(vinylidene fluoride)‐based friction materials of ultrasonic motorsPolymer Composites, 2014
- Modified Graphene/Polyimide Nanocomposites: Reinforcing and Tribological EffectsACS Applied Materials & Interfaces, 2013
- Friction and Wear Mechanisms of Sintered and Thermoplastic Polyimides under Adhesive SlidingMacromolecular Materials and Engineering, 2007
- Self-lubricating polymer composites and polymer transfer film lubrication for space applicationsTribology International, 1990