Intergranular Corrosion in a Martensitic Stainless Steel Detected by Electrochemical Tests
Authors:
- N. Alonso-FalleirosNAN. Alonso-Falleiros
- M. MagriMMM. Magri
- 1 August 1999
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 55 (8) , 769-778
Abstract
Quenched and tempered martensitic stainless steel UNS S41000 was tested electrochemically for susceptibility to sensitization in specimens quenched from 975°C (1,248 K) and tempered for 2 h at different temperatures between 300°C (573 K) and 700°C (973 K). Besides an oxalic acid etch test, the following tests were performed using a potentiostat and 1 N sulfuric acid (H2SO4) solution: potentiokinetic polarization, potentiostatic etch, and electrochemical potentiokinetic reactivation in the double-loop version (DL-EPR). Tested surfaces were observed metallographically. The maximum susceptibility to intergranular corrosion was observed in the condition tempered at 550°C (823 K), and a sensitized structure was detected. For lower tempering temperatures, steel was less sensitized, or not at all, and for higher tempering temperatures, steel was less sensitized. All tests except for the oxalic acid etch were able to evaluate quantitatively different degrees of sensitization as a function of tempering temperature. The DL-EPR method was the best to discriminate degrees of sensitization.Keywords
This publication has 12 references indexed in Scilit:
- Electrochemical Polarization Method to Detect Aging Embrittlement of 321 Stainless SteelCorrosion, 1993
- The Double Loop Reactivation Method for Detecting Sensitization in AISI 304 Stainless SteelsCorrosion, 1984
- The Effect of Heat Treatment Parameters on the Anodic Polarization Behavior of 440C Stainless SteelCorrosion, 1983
- The Second Anodic Current Maximum for Type 430 Stainless Steel in 0.1N H2SO4Corrosion, 1975
- Intergranular Corrosion of Iron-Nickel-Chromium Alloys1973
- Interpretation of the Second Anodic Current Maximum on Polarization Curves of Sensitized Chromium Steels in 1N H2 SO4Corrosion, 1971
- Einfluß der Wärmebehandlung auf den Verlauf der Stromdichte‐Potential‐Kurven bei einem 13%igen ChromstahlgußMaterials and Corrosion, 1969
- Interpretation of Passive Current Maxima During Polarization of Stainless SteelsCorrosion, 1968
- Predicting the intergranular corrosion of austenitic stainless steelsCorrosion Science, 1968
- Potentiostatic study on the intergranular corrosion of an austenitic chromium-nickel stainless steelCorrosion Science, 1966