Optimization of Metallographic Sample Preparation for AFM/SKPFM Based Phase Distinction of Complex and Dual Phase High Strength Steels
Authors:
- 1 June 2021
- journal article
- research article
- Published by Walter de Gruyter GmbH in Practical Metallography
- Vol. 58 (6) , 308-331
Abstract
For the comprehensive investigation of advanced high strength steel grades, like complex and dual phase steels, Atomic Force Microscopy (AFM) and Scanning Kelvin Probe Force Microscopy (SKPFM) have proven to be useful tools, especially for analysis of hydrogen permeability of the individual steel phases. However, for these studies a preparation route, exposing the microstructure of the steel, is necessary. Various sample preparation methods were examined, focusing on electropolishing and sputtering, and the selected route was optimized to guarantee reproducibility and stability of the prepared surface. Electropolishing was shown to be highly efficient to selectively reveal the individual steel phases without introducing strong topographical features disturbing the AFM measurements. A subsequent sputtering step was introduced to improve the stability and preservability of the surface up to several months. Finally, distinction of the steel phases via AFM/SKPFM, was complemented and compared with results from EBSD and XRD.Keywords
This publication has 22 references indexed in Scilit:
- About quantitative EBSD analysis of deformation and recovery substructures in pure TantalumIOP Conference Series: Materials Science and Engineering, 2015
- Characterisation of microstructure and modelling of flow behaviour of bainite-aided dual-phase steelComputational Materials Science, 2013
- Rotating disc electrode study of the electropolishing mechanism of NiTi in methanolic sulfuric acidElectrochimica Acta, 2007
- High-resolution Kelvin probe microscopy in corrosion science: Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP)Electrochimica Acta, 2007
- Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD techniqueMaterials Science and Engineering: A, 2007
- Electropolishing of NiTi shape memory alloys in methanolic H2SO4Electrochimica Acta, 2006
- Application of EBSD to analysis of microstructures in commercial steelsMaterials Science and Technology, 2006
- Ätztechniken für die Phasencharakterisierung von niedriglegierten Dual-Phasen- und TRIP-StählenPractical Metallography, 2006
- Advanced cold rolled steels for automotive applicationsMaterialwissenschaft und Werkstofftechnik, 2006
- Eine neue glimmentladungslampe für die optische emissionsspektralanalyseSpectrochimica Acta Part B: Atomic Spectroscopy, 1968