Grain Boundary Wetting by a Second Solid Phase in the High Entropy Alloys: A Review
Open Access
Abstract
In this review, the phenomenon of grain boundary (GB) wetting by the second solid phase is analyzed for the high entropy alloys (HEAs). Similar to the GB wetting by the liquid phase, the GB wetting by the second solid phase can be incomplete (partial) or complete. In the former case, the second solid phase forms in the GB of a matrix, the chain of (usually lenticular) precipitates with a certain non-zero contact angle. In the latter case, it forms in the GB continuous layers between matrix grains which completely separate the matrix crystallites. The GB wetting by the second solid phase can be observed in HEAs produced by all solidification-based technologies. The particle chains or continuous layers of a second solid phase form in GBs also without the mediation of a liquid phase, for example by solid-phase sintering or coatings deposition. To describe the GB wetting by the second solid phase, the new GB tie-lines should be considered in the two- or multiphase areas in the multicomponent phase diagrams for HEAs. The GB wetting by the second solid phase can be used to improve the properties of HEAs by applying the so-called grain boundary engineering methods.Keywords
Funding Information
- Ministerstwo Edukacji i Nauki (075-15-2021-945)
- Russian Ministry of Science and Higher Education (075-15-2021-945)
This publication has 78 references indexed in Scilit:
- A new titanium alloy with a combination of high strength, high strain hardening and improved ductilityScripta Materialia, 2015
- Refractory high-entropy alloysIntermetallics, 2010
- Continuous and discontinuous grain-boundary wetting inPhysical Review B, 2008
- Grain boundary grooving in molybdenum bicrystalsJournal of Materials Science, 2006
- Grain boundary wetting by a solid phase; microstructural development in a Zn–5 wt% Al alloyActa Materialia, 2004
- Microstructural development in equiatomic multicomponent alloysMaterials Science and Engineering: A, 2004
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- The Solidus Line of the Cu-Bi Phase DiagramJournal of Phase Equilibria and Diffusion, 1997
- Wetting transition on grain boundaries in Al contacting with a Sn-rich meltInterface Science, 1995
- Transformation of ∑17 special tilt boundaries to general boundaries in tinActa Metallurgica, 1988