Optimized Demagnetizing Control of DFIG Power Converter for Reduced Thermal Stress During Symmetrical Grid Fault
- 7 February 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 33 (12) , 10326-10340
Abstract
Direct linking between the stator of a Doubly-Fed Induction Generator (DFIG) and the power grid makes this type of generator sensitive to disturbances in the grid voltage, which may lead to higher voltage and current on the rotor side. Moreover, modern grid codes, which specify stringent requirements on reactive power compensation, challenge fault ride-through operation even more. In this paper, based on conventional demagnetizing current control, the capability of a DFIG rotor-side converter to ride through a symmetrical grid fault is calculated, in accordance with its current and voltage ratings. Afterwards, an optimized demagnetizing coefficient is designed to guarantee the same rotor current amplitude between the instants of the fault occurrence and the reactive current injection. A reduction of the junction temperature of the power device can thereby be achieved. It is concluded that, regardless of the rotor speed, the demagnetizing coefficient is related only to the dip level. Compared with traditional vector control, a simulation of 2 MW DFIG system agrees with the reduced thermal stress during the fault period, and experimental results in a down-scale DFIG system verify the feasibility of the proposed control strategy as seen from the electrical characteristics.Keywords
This publication has 23 references indexed in Scilit:
- Comparison of Wind Power Converter Reliability With Low-Speed and Medium-Speed Permanent-Magnet Synchronous GeneratorsIEEE Transactions on Industrial Electronics, 2015
- Control of Doubly Fed Induction Generator to Ride Through Recurring Grid FaultsIEEE Transactions on Power Electronics, 2015
- Doubly Fed Induction Generator Wind Turbine Systems Subject to Recurring Symmetrical Grid FaultsIEEE Transactions on Power Electronics, 2015
- Thermal Loading and Lifetime Estimation for Power Device Considering Mission Profiles in Wind Power ConverterIEEE Transactions on Power Electronics, 2015
- Reduced Cost of Reactive Power in Doubly Fed Induction Generator Wind Turbine System With Optimized Grid FilterIEEE Transactions on Power Electronics, 2014
- Optimized Reactive Power Flow of DFIG Power Converters for Better Reliability Performance Considering Grid CodesIEEE Transactions on Industrial Electronics, 2014
- Overview of Control Systems for the Operation of DFIGs in Wind Energy ApplicationsIEEE Transactions on Industrial Electronics, 2013
- A review of grid code technical requirements for wind farmsIET Renewable Power Generation, 2009
- Control of a Doubly Fed Induction Generator in a Wind Turbine During Grid Fault Ride-ThroughIEEE Transactions on Energy Conversion, 2006
- Ridethrough of Wind Turbines with Doubly-Fed Induction Generator During a Voltage DipIEEE Transactions on Energy Conversion, 2005