Abstract
While numerous techniques have been proposed to improve the mechanical contact performance of disc brakes during single-stop braking. The aim of this numerical study is to investigate the effect of disc material on the mechanical performance of brake pads. Therefore, a mechanical analysis with COMSOL Multiphysics 6.1 software is performed on two types of solid disc materials: Inconel 718 and grey cast iron using the same model of calculation. The calculation was examined using the FE method. This analysis was carried out to determine wear depth, wear rate, Von Mises stress on the disc and contact pressures during single-stop braking. The results indicate significant differences in mechanical performance as a function of disc material properties. INCONEL 718 showed the lowest wear rate, while grey cast iron showed the lowest Von Mises stress due to their mechanical properties. These results confirm the importance of disc material in optimising brake pad performance.