ATAbdelali Tajmouati

Abdelali Tajmouati

*This is an algorithmically generated author record based on publicly available information.

Abdelali Tajmouati has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The effect of disc material on the mechanical performance of brake pads during single-stop braking

    by Mohammed Chaqouri, Mohamed Maniana, Erchiqui Fouad, Abdelali Tajmouati

    While numerous techniques have been proposed to improve the mechanical contact performance of disc brakes during single-stop braking. The aim of this numerical study is to investigate the effect of disc material on the mechanical performance of brake pads. Therefore, a mechanical analysis with COMSOL Multiphysics 6.1 software is performed on two types of solid disc materials: Inconel 718 and grey cast iron using the same model of calculation. The calculation was examined using the FE method. This analysis was carried out to determine wear depth, wear rate, Von Mises stress on the disc and contact pressures during single-stop braking. The results indicate significant differences in mechanical performance as a function of disc material properties. INCONEL 718 showed the lowest wear rate, while grey cast iron showed the lowest Von Mises stress due to their mechanical properties. These results confirm the importance of disc material in optimising brake pad performance.

  • Open Access

    A low-cost dual bandpass planar filter for WiMAX and mobile communications

    by Amal Kadiri, Abdelali Tajmouati, Jamal Zbitou, Ahmed Lakhssassi

    This study proposes a new design of low-cost dual-bandpass filter for worldwide interoperability and microwave access (WiMAX) band at 3.50 GHz and mobile communications band at 1.19 GHz. A high pass filter and a stopband filter make up the new dual-bandpass filter structure. Different theoretical studies were carried out for the design of the proposed filter. This filter’s base is a RO5880 substrate with a dielectric permittivity constant of 2.2, loss tangent of 0.0009 and 1.6 mm thickness. High mashing density was used to validate the various simulated structures while accounting for two numerical methods: the moment technique and the finite integration method. The final circuit's overall dimensions are 60×178,3 mm2.


  • Open Access

    A new design of a printed reconfigurable coplanar multiband antenna

    by Fatima Ouberri, Abdelali Tajmouati, Jamal Zbitou, Mohamed Latrach

    The demand for multi-functional components has increased enormously in recent years. Advances in integrated technology have enabled researchers to adapt diverse applications operating at different frequencies in a single wireless device. A compact broadband coplanar waveguide (CPW)-fed square aperture monopole antenna with inverted-L grounded strips is first described. The proposed antenna has a small size of 60×60×0.74 mm3 and has excellent performances which include a good input impedance matching with a much wider operating bandwidth, an excitation of the circular polarization at 2.45 GHz, and a stable omnidirectional radiation pattern. Then, a multiband reconfigurable antenna design is developed from this structure. The frequency reconfigurable approach is obtained using a varactor diode. In this work, it is observed that frequency diversity can be obtained by varying the value of the capacity by leaving the dimensions antenna unchanged. The results are given using CST microwave studio and show good performances in terms of return loss, bandwidth, gain and radiation pattern and demonstrate that the proposed antenna offers a reconfigurable solution for multi-standard wireless communication applications.

  • Miniature 2.45 GHz Rectenna for Low Levels of Power

    by Abdellah Taybi, Abdelali Tajmouati, Jamal Zbitou, Ahmed Lakhssassi, Ahmed Errkik, El Abdellaoui Larbi

  • Novel low cost compact printed antenna CPW-fed for GSM, GPS and PCS applications

    by Issam Zahraoui, Jamal Zbitou, Ahmed Errkik, Elhassane Abdelmounim, Abdelali Tajmouati, Mohamed Latrach

    In this paper, a novel study on the design and analysis of a compact printed antenna for multi-band applications are presented. The structure of the entire area is 45×45.5 mm 2 and is printed on an FR-4 epoxy substrate. It is suitable for GSM/GPS/PCS applications by using an M-shaped antenna which is formed of different arms and an L-shaped shorted strip connected between the feeding line and the ground plane. Simulation results of the antenna input impedance bandwidths for, S11 ≤ (-10) dB, show that it covers the GSM, GPS and PCS bands. Also, a stable radiation pattern and an average antenna “Advanced Design System”. Also, we have conducted another study by using CST-MW to compare the results obtained with ADS which give good agreement between the both EM solvers.