Bridging the Scale-Up Gap in Emerging Batteries: A Comparative Cradle-to-Gate Life Cycle Assessment of Graphite, Silicon Composite, and Silicon-Dominant Anodes in Full Cells Using a Dual Functional Unit Approach
Preprint
- 26 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Driven by the increasing demand for energy storage, silicon anodes have emerged as an alternative candidate for next-gen lithium-ion batteries (LIBs) due to their high theoretical capacity. Despite these advantages, practical application remains limited by degradation phenomena. However, evaluating these emerging materials at laboratory-scale, using coin cells creates a substantial scale-up gap in Life Cycle Assessment (LCA), limiting direct comparison with previous studies. To overcome this limitation, this work presents a cradle-to-gate LCA of coin cell (CR2032) adopting lithium iron phosphate (LFP) as cathode combined respectively with graphite, silicon-composite, and silicon-dominant anodes. The assessment adopts a dual functional unit (FU) approach, considering both a single coin cell and 1 kWh of delivered energy storage capacity. At the single-cell level, the overwhelming mass contribution of inactive components, such as the stainless-steel casing, results in an environmental profile determined by the chosen cell format rather than by the properties of active materials. When the analytical focus is expanded to a 1 kWh FU, electrochemical performance emerges as the primary factor. The lower initial efficiencies and faster degradation rates of early-stage silicon formulations multiply the number of cells required to have 1 kWh of energy capacity, significantly increasing stainless-steel components and liquid electrolyte consumption while limiting the environmental improvements achieved at the material level. These findings indicate that material innovation alone is insufficient to achieve meaningful life cycle sustainability benefits. Rather, its benefits must be realized alongside cell geometry optimization and performance improvements to ensure substantial reductions in environmental impacts at commercial scale.Keywords
This publication has 34 references indexed in Scilit:
- Life Cycle Assessment of Graphite, Silicon Composite, and Silicon‐Dominant Anodes for Lithium‐Ion Batteries: Environmental Impacts, Uncertainties, and Supply Chain ConsiderationsAdvanced Sustainable Systems, 2026
- Meta-analysis of life cycle assessments for Li-ion batteries production emissionsThe International Journal of Life Cycle Assessment, 2025
- Lithium‐Diffusion Induced Capacity Losses in Lithium‐Based BatteriesAdvanced Materials, 2022
- Cradle-to-gate life cycle assessment of all-solid-state lithium-ion batteries for sustainable design and manufacturingThe International Journal of Life Cycle Assessment, 2022
- Environmental life cycle implications of upscaling lithium-ion battery productionThe International Journal of Life Cycle Assessment, 2021
- Life‐Cycle Assessment Considerations for Batteries and Battery MaterialsAdvanced Energy Materials, 2021
- Upscaling methods used in ex ante life cycle assessment of emerging technologies: a reviewThe International Journal of Life Cycle Assessment, 2020
- Comparative life cycle assessment of lithium-ion batteries with lithium metal, silicon nanowire, and graphite anodesClean Technologies and Environmental Policy, 2018
- ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint levelThe International Journal of Life Cycle Assessment, 2016
- Empirically based uncertainty factors for the pedigree matrix in ecoinventThe International Journal of Life Cycle Assessment, 2013