Elisa Ravesio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elisa Ravesio has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Daniele Versaci
Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129 Torino, Italy
3 shared publications - Laura Genovese
Coesia Engineering Center Coesia Bologna Italy
2 shared publications - Silvia Bodoardo
Politecnico di Torino
2 shared publications - Valentina Sumini
Politecnico di Milano
2 shared publications - Carlotta Francia
Department of Applied Science and Technology, Politecnico di Torino, Corso Duca Degli Abruzzi 24, 10129 Torino, Italy
1 shared publication - Federico Bella
Department of Applied Science and Technology Politecnico di Torino Turin Italy
1 shared publication
Latest Publications
- Open Access
- 26 August 2026
- Published by Elsevier in SSRN Electronic Journal
Bridging the Scale-Up Gap in Emerging Batteries: A Comparative Cradle-to-Gate Life Cycle Assessment of Graphite, Silicon Composite, and Silicon-Dominant Anodes in Full Cells Using a Dual Functional Unit Approach
Driven by the increasing demand for energy storage, silicon anodes have emerged as an alternative candidate for next-gen lithium-ion batteries (LIBs) due to their high theoretical capacity. Despite these advantages, practical application remains limited by degradation phenomena. However, evaluating these emerging materials at laboratory-scale, using coin cells creates a substantial scale-up gap in Life Cycle Assessment (LCA), limiting direct comparison with previous studies. To overcome this limitation, this work presents a cradle-to-gate LCA of coin cell (CR2032) adopting lithium iron phosphate (LFP) as cathode combined respectively with graphite, silicon-composite, and silicon-dominant anodes. The assessment adopts a dual functional unit (FU) approach, considering both a single coin cell and 1 kWh of delivered energy storage capacity. At the single-cell level, the overwhelming mass contribution of inactive components, such as the stainless-steel casing, results in an environmental profile determined by the chosen cell format rather than by the properties of active materials. When the analytical focus is expanded to a 1 kWh FU, electrochemical performance emerges as the primary factor. The lower initial efficiencies and faster degradation rates of early-stage silicon formulations multiply the number of cells required to have 1 kWh of energy capacity, significantly increasing stainless-steel components and liquid electrolyte consumption while limiting the environmental improvements achieved at the material level. These findings indicate that material innovation alone is insufficient to achieve meaningful life cycle sustainability benefits. Rather, its benefits must be realized alongside cell geometry optimization and performance improvements to ensure substantial reductions in environmental impacts at commercial scale.
- 26 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessBridging the Scale-Up Gap in Emerging Batteries: A Comparative Cradle-to-Gate Life Cycle Assessment of Graphite, Silicon Composite, and Silicon-Dominant Anodes in Full Cells Using a Dual Functional Unit Approach
Driven by the increasing demand for energy storage, silicon anodes have emerged as an alternative candidate for next-gen lithium-ion batteries (LIBs) due to their high theoretical capacity. Despite these advantages, practical application remains limited by degradation phenomena. However, evaluating these emerging materials at laboratory-scale, using coin cells creates a substantial scale-up gap in Life Cycle Assessment (LCA), limiting direct comparison with previous studies. To overcome this limitation, this work presents a cradle-to-gate LCA of coin cell (CR2032) adopting lithium iron phosphate (LFP) as cathode combined respectively with graphite, silicon-composite, and silicon-dominant anodes. The assessment adopts a dual functional unit (FU) approach, considering both a single coin cell and 1 kWh of delivered energy storage capacity. At the single-cell level, the overwhelming mass contribution of inactive components, such as the stainless-steel casing, results in an environmental profile determined by the chosen cell format rather than by the properties of active materials. When the analytical focus is expanded to a 1 kWh FU, electrochemical performance emerges as the primary factor. The lower initial efficiencies and faster degradation rates of early-stage silicon formulations multiply the number of cells required to have 1 kWh of energy capacity, significantly increasing stainless-steel components and liquid electrolyte consumption while limiting the environmental improvements achieved at the material level. These findings indicate that material innovation alone is insufficient to achieve meaningful life cycle sustainability benefits. Rather, its benefits must be realized alongside cell geometry optimization and performance improvements to ensure substantial reductions in environmental impacts at commercial scale.
- Open Access
- 31 March 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 554
Optimization of binary binder blends for aqueous-based slurries of SiOx/C for next-generation lithium-ion batteries
- 31 March 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 554
Open AccessOptimization of binary binder blends for aqueous-based slurries of SiOx/C for next-generation lithium-ion batteries
- Open Access
- 18 February 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (2)
Life Cycle Assessment of Graphite, Silicon Composite, and Silicon‐Dominant Anodes for Lithium‐Ion Batteries: Environmental Impacts, Uncertainties, and Supply Chain Considerations
Lithium‐ion batteries (LIBs) are essential for applications from portable devices to electric vehicles, where higher specific energy and energy density drive innovation. As cathode research moves toward cobalt‐free formulations, anode development focuses on incorporating silicon into graphite. Although silicon production is more energy‐intensive than synthetic graphite, its superior theoretical capacity (4200 vs. 372 mAh g −1 ) reduces the material demand for equivalent electrochemical performance. This study assessed the environmental impacts of producing and testing three anode types, graphite (benchmark, ∼350 mAh g −1 ), silicon composite (10% Si, ∼400 mAh g −1 ), and silicon‐dominant (80% Si, capacity limited at ∼1000 mAh g −1 ) using Life Cycle Assessment (LCA) at laboratory scale. Results indicated that introducing silicon leads to lower impacts under the investigated conditions across most of the 18 midpoint categories of ReCiPe 2016 (H). Regarding the carbon footprint, CO 2 emissions decreased by about 40% (from 1.33 to 0.79 kg CO 2 ‐Eq) for the silicon composite and up to 97% (0.04 kg CO 2 ‐Eq) for the silicon‐dominant electrode. Sensitivity analysis highlighted the importance of supply‐chain conditions: adopting a European electricity mix and shorter transport distances led to additional reductions even at gram‐scale production. Overall, integrating silicon and optimizing regional supply chains promoted more sustainable LIB production.
- 18 February 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (2)
Open AccessLife Cycle Assessment of Graphite, Silicon Composite, and Silicon‐Dominant Anodes for Lithium‐Ion Batteries: Environmental Impacts, Uncertainties, and Supply Chain Considerations
Lithium‐ion batteries (LIBs) are essential for applications from portable devices to electric vehicles, where higher specific energy and energy density drive innovation. As cathode research moves toward cobalt‐free formulations, anode development focuses on incorporating silicon into graphite. Although silicon production is more energy‐intensive than synthetic graphite, its superior theoretical capacity (4200 vs. 372 mAh g −1 ) reduces the material demand for equivalent electrochemical performance. This study assessed the environmental impacts of producing and testing three anode types, graphite (benchmark, ∼350 mAh g −1 ), silicon composite (10% Si, ∼400 mAh g −1 ), and silicon‐dominant (80% Si, capacity limited at ∼1000 mAh g −1 ) using Life Cycle Assessment (LCA) at laboratory scale. Results indicated that introducing silicon leads to lower impacts under the investigated conditions across most of the 18 midpoint categories of ReCiPe 2016 (H). Regarding the carbon footprint, CO 2 emissions decreased by about 40% (from 1.33 to 0.79 kg CO 2 ‐Eq) for the silicon composite and up to 97% (0.04 kg CO 2 ‐Eq) for the silicon‐dominant electrode. Sensitivity analysis highlighted the importance of supply‐chain conditions: adopting a European electricity mix and shorter transport distances led to additional reductions even at gram‐scale production. Overall, integrating silicon and optimizing regional supply chains promoted more sustainable LIB production.