Influence of the Purification Degree of Cellulose from Posidonia oceanica on the Properties of Cellulose-PLA Composites
Open Access
- 5 December 2024
- journal article
- research article
- Published by MDPI AG in Polysaccharides
- Vol. 5 (4) , 807-822
Abstract
PLA biocomposites, incorporating 5% wt. of lignocellulosic fibres (LF) from Posidonia oceanica waste with different degrees of cellulose purification, were obtained by melt blending and compression moulding. The LF were obtained after removing part of the non-cellulosic components by subcritical water extraction at 150 and 170 °C and after bleaching the extracted residues with hydrogen peroxide or sodium chlorite. The non-bleached LF provided the composites with a brown colour and opacity, while the bleached LF impacted the optical properties of composites to a lower extent, depending on their whiteness. The LF composition had a noticeable effect on the composites’ mechanical and barrier properties. All LF reduced the water vapour barrier capacity while promoting the oxygen barrier of the films. Bleached LF enhanced the film stiffness and reduced extensibility and resistance to break, whereas non-bleached LF had lower impacts on the tensile parameters. Considering the mechanical and barrier performance of the composites, the fibres obtained at 170 °C and bleached with sodium chlorite exhibited the best behaviour. Nevertheless, if transparency and colour are not limiting for the use of the films, untreated LF allowed for good preservation of the water vapour permeability of PLA films and enhanced the oxygen barrier capacity, with a similar mechanical response as the other non-bleached fractions.Keywords
Funding Information
- Agencia Estatal de Investigación (TED2021-132295B-I00, CIPROM/2021/071)
- Generalitat Valenciana (TED2021-132295B-I00, CIPROM/2021/071)
This publication has 46 references indexed in Scilit:
- Combining subcritical water extraction and bleaching with hydrogen peroxide to obtain cellulose fibres from rice strawCarbohydrate Polymer Technologies and Applications, 2024
- A review of research and application of polylactic acid compositesJournal of Applied Polymer Science, 2022
- Hybrid biocomposites based on polylactic acid and natural fillers from Chamaerops humilis dwarf palm and Posidonia oceanica leavesAdvanced Composites and Hybrid Materials, 2022
- Preparation, Characterization and Properties of Biodegradable Composites from Bamboo Fibers—Mechanical and Morphological StudyJournal of Polymers and the Environment, 2021
- Natural fiber reinforced polylactic acid composites: A reviewPolymer Composites, 2018
- Morphology and thermal properties of PLA–cellulose nanofibers compositesCarbohydrate Polymers, 2013
- Chemical, physical and spectroscopic characterization of Posidonia oceanica (L.) Del. residues and their possible recycleBiomass and Bioenergy, 2011
- Chemical composition and pulping of date palm rachis and Posidonia oceanica – A comparison with other wood and non-wood fibre sourcesBioresource Technology, 2010
- Structure versus properties relationship of poly(lactic acid). I. Effect of crystallinity on barrier propertiesJournal of Polymer Science Part B: Polymer Physics, 2009
- Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)Journal of Applied Polymer Science, 2005