Hierarchical Core‐Shell Phase‐Change Fibers for Active‐Passive Thermal Management, Multimodal Sensing, and Infrared Camouflage
Abstract
The continuous development of smart textiles calls for multifunctional fibers that can simultaneously achieve thermal energy storage, active heating, and real‐time sensing. Using an emulsion‐based wet‐spinning strategy, thermoplastic polyurethane/octadecane/poly(3, 4‐ethylenedioxythiophene): poly(styrenesulfonate)/silver microparticles composite fibers (TOPAFs) with a hierarchical three‐layer core‐shell architecture were prepared. The double diffusion strategy was utilized to achieve synchronous encapsulation of phase change materials. The fibers show a melting enthalpy of approximately 133.0 J g −1 for TOPAF and an elongation rate exceeding 400%. The fiber conductivity exceeded 268.2 S m −1 . Under simulated sunlight exposure, the surface temperature of TOPAF increased from approximately 27.8°C to 41.8°C. At a voltage of 2.0 V, the fiber temperature reached approximately 47.9°C, demonstrating excellent photothermal and electrothermal conversion. Under outdoor sunlight exposure, the surface temperature of TOPAF was on average ∼10.2°C higher than that of cotton fabric. TOPAF exhibited multimodal sensing performance. The flower‐shaped AgMPs made the average infrared absorption rate of TOPAF in the long‐wave infrared band only 5.4%, which is 10.1 percentage points lower than TPU fiber. TOPAF's energy storage and conversion, multimodal sensing and infrared camouflage features provide a solution for textiles to achieve self‐powered temperature management, dynamic thermal camouflage and signal monitoring.Keywords
Funding Information
- National Natural Science Foundation of China (82172040)
This publication has 50 references indexed in Scilit:
- Fibrous Pressure Sensor with Unique Resistance Increase under Partial Compression: Coaxial Wet‐Spun TiO 2 /Graphene/Thermoplastic Polyurethane Multi‐Wall Multifunctional FiberAdvanced Materials, 2025
- High‐Stretchable Solid–Solid Phase Change Aerogel Surface‐Modified with Ni‐MOF for Efficient Photothermal Energy Conversion‐Storage and Thermal‐Induced Shape ProgrammingAdvanced Functional Materials, 2025
- Three‐Phase Emulsion Derived Solar‐Thermal Reduced Graphene Oxide/Octadecane Phase‐Change Foam for Salt‐Resistant Day‐Night Water EvaporationAdvanced Functional Materials, 2025
- An Intelligent, Recyclable, Biomass Film for Adaptive Day‐Night and Year‐Round Energy SavingsAdvanced Functional Materials, 2024
- Modification of Phase Change Materials for Electric‐Thermal, Photo‐Thermal, and Magnetic‐Thermal Conversions: A Comprehensive ReviewAdvanced Functional Materials, 2024
- Highly Conductive PEDOT:PSS AerogelsAdvanced Functional Materials, 2024
- Boosting the Performance of PEDOT:PSS Based Electronics Via Ionic LiquidsAdvanced Materials, 2024
- A Bioinspired Bilevel Metamaterial for Multispectral Manipulation toward Visible, Multi‐Wavelength Detection Lasers and Mid‐Infrared Selective RadiationAdvanced Materials, 2023
- PEDOT:PSS: Smart Infrared Rewritable MaterialsAdvanced Functional Materials, 2023
- Highly Stretchable, Conductive and Long‐Term Stable PEDOT:PSS Fibers with Surface Arrays for Wearable SensorsAdvanced Engineering Materials, 2021