DLDong Lv

Dong Lv

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dong Lv has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hierarchical Core‐Shell Phase‐Change Fibers for Active‐Passive Thermal Management, Multimodal Sensing, and Infrared Camouflage

    by Yuhang Wang, Xinge Chen, Yuzhao Wan, Dong Lv, Xiaoyun Zhang, Jianbin Zang, Weizhong Yuan

    The continuous development of smart textiles calls for multifunctional fibers that can simultaneously achieve thermal energy storage, active heating, and real‐time sensing. Using an emulsion‐based wet‐spinning strategy, thermoplastic polyurethane/octadecane/poly(3, 4‐ethylenedioxythiophene): poly(styrenesulfonate)/silver microparticles composite fibers (TOPAFs) with a hierarchical three‐layer core‐shell architecture were prepared. The double diffusion strategy was utilized to achieve synchronous encapsulation of phase change materials. The fibers show a melting enthalpy of approximately 133.0 J g −1 for TOPAF and an elongation rate exceeding 400%. The fiber conductivity exceeded 268.2 S m −1 . Under simulated sunlight exposure, the surface temperature of TOPAF increased from approximately 27.8°C to 41.8°C. At a voltage of 2.0 V, the fiber temperature reached approximately 47.9°C, demonstrating excellent photothermal and electrothermal conversion. Under outdoor sunlight exposure, the surface temperature of TOPAF was on average ∼10.2°C higher than that of cotton fabric. TOPAF exhibited multimodal sensing performance. The flower‐shaped AgMPs made the average infrared absorption rate of TOPAF in the long‐wave infrared band only 5.4%, which is 10.1 percentage points lower than TPU fiber. TOPAF's energy storage and conversion, multimodal sensing and infrared camouflage features provide a solution for textiles to achieve self‐powered temperature management, dynamic thermal camouflage and signal monitoring.

  • Aqueous Kilogram‐Scale Electrosynthesis of Reagent‐Grade Cystine Enabled by Asymmetric N, P‐Coordinated Ni Single Atoms

    by Dong Lv, Hualong Yu, Tian Zhang, Aiguo Kong, Hui Ying Yang, Rui Liu

    The scalable and selective oxidative coupling of organothiols to disulfides remains a challenge in sustainable chemical manufacturing, as conventional routes rely on stoichiometric chemical oxidants and generate substantial waste. Here, we report a simple, “green” aqueous electrosynthesis route for the kilogram‐scale production of reagent‐grade cystine, featured by the electrooxidation of cysteine (CysER) in a membrane‐free single‐cell electrolyzer with 1 M KCl electrolyte. This electrosynthesis efficiency is mainly enabled by an asymmetric N,P‐dual‐coordinated Ni single‐atom electrocatalyst (Ni‐N 3 P/C), which lowers the onset potential for CysER, suppresses the competing oxygen evolution reaction, and accelerates the CysER reaction kinetics. The electrolysis at industrially relevant currents of even 10 A yields over one kilogram of cystine with >99% purity without complicated separation and purification procedures, owing to the cystine product spontaneously precipitating due to its low water solubility. Techno‐economic analysis estimates a ∼70% reduction in production cost compared to the conventional chemical route. This work establishes a practical and scalable electrocatalytic strategy for the green synthesis of high‐value disulfides based on an asymmetric single‐atom electrocatalyst.

  • Electron and Hydrogen Dual Spillover at CeO 2 /Fe 3 C Interfaces for Efficient NH 3 Electrosynthesis and High‐Performance Zn‐NO 3 − Batteries

    by Jiaqi Huang, Deng Liu, Dong Lv, Hongyan Chen, Aiguo Kong, Xiangzhi Cui, Rui Liu

    The electrocatalytic nitrate reduction reaction (NO 3 RR) offers a sustainable route for ambient ammonia synthesis but is hindered by insufficient active hydrogen ( * H) supply and strong adsorption of oxygen‐containing intermediates. Herein, we propose an electron‐ and hydrogen‐dual‐channel interfacial engineering strategy by constructing a heterojunction of grain‐boundary‐rich CeO 2 intimately interfaced with Fe 3 C on nickel foam (CeO 2 /Fe 3 C@NF). Oxygen‐vacancy‐rich CeO 2 with reversible Ce 3+ /Ce 4+ redox pairs serves a dual function: it donates electrons to Fe 3 C, downshifting the d‐band center of Fe sites to weaken intermediate adsorption and mitigate surface poisoning; and it facilitates water dissociation to generate * H, which spills over onto Fe 3 C to ensure adequate * H supply for hydrogenation. Benefiting from this dual spillover mechanism, CeO 2 /Fe 3 C@NF achieves an exceptional NH 3 electrosynthesis rate of 1.343 mmol h −1 cm −2 with a Faradaic efficiency of 97.04% at −0.3 V vs. RHE in an H‐type cell, ranking among the best non‐precious NO 3 RR electrocatalysts. Furthermore, a rechargeable Zn‐NO 3 − battery using CeO 2 /Fe 3 C@NF as the cathode delivers a power density of 8.93 mW cm −2 and stable operation over 100 h. This work establishes an electron‐ and hydrogen‐dual‐channel paradigm for rational design of efficient NO 3 RR electrocatalysts.

  • Zinc–Salen Anchored Multidentate Two‐Dimensional Metal–Organic Framework for Coupling Photoredox of Oxygen and Benzylamine

    by Xinxin Chen, Dong Lv, Aiguo Kong, Deng Liu, Yue Chen, Qianfeng Gu, Qichun Zhang, Rui Liu

    Two‐dimensional π‐conjugated metal–organic frameworks (2D MOFs) are promising solar‐driven catalysts, but often suffer from sluggish charge separation due to insufficient strong electron acceptors. To overcome this, two isostructural and heteroporous 2D MOFs, Zn‐HTT, and Zn‐HTD were built from multidentate Zn─O 4 node linkages but differed in active‐site design. Zn‐HTT integrates anchored chelating Zn─N 2 O 2 Salen moieties and Zn─O 4 units, whereas Zn‐HTD contains only Zn─O 4 nodes. The Zn–Salen units in Zn‐HTT narrow the bandgap to 1.99 eV and establish a stronger intramolecular donor–acceptor architecture that drives efficient spatial charge separation. Consequently, Zn‐HTT achieves a high hydrogen peroxide (H 2 O 2 ) photosynthesis rate of 21.9 mmol g −1 h −1 and delivers 94.5% yield of N‐benzylbenzaldimine from the benzylamine photooxidation, significantly outperforming Zn‐HTD (14.2 mmol g −1 h −1 ; 85.6% yield). Mechanistic studies confirm that the Zn–Salen sites serve as superior electron‐accepting and O 2 ‐activating centers, enabling strong *OO intermediate adsorption and highly selective two‐electron oxygen reduction to H 2 O 2 . Moreover, Zn‐HTT exhibits better stability, retaining >91% activity over 10 cycles and showing enhanced thermal resilience, attributable to the robust chelating Zn–Salen linkages. This work demonstrates that integrating metallo–Salen motifs into multidentate 2D MOFs is a viable strategy to boost photocatalytic activity, selectivity, and durability in solar‐driven synthesis.


  • Zinc–Salen Anchored Multidentate Two‐Dimensional Metal–Organic Framework for Coupling Photoredox of Oxygen and Benzylamine

    by Xinxin Chen, Dong Lv, Aiguo Kong, Deng Liu, Yue Chen, Qianfeng Gu, Qichun Zhang, Rui Liu

    Two‐dimensional π‐conjugated metal–organic frameworks (2D MOFs) are promising solar‐driven catalysts, but often suffer from sluggish charge separation due to insufficient strong electron acceptors. To overcome this, two isostructural and heteroporous 2D MOFs, Zn‐HTT, and Zn‐HTD were built from multidentate Zn─O 4 node linkages but differed in active‐site design. Zn‐HTT integrates anchored chelating Zn─N 2 O 2 Salen moieties and Zn─O 4 units, whereas Zn‐HTD contains only Zn─O 4 nodes. The Zn–Salen units in Zn‐HTT narrow the bandgap to 1.99 eV and establish a stronger intramolecular donor–acceptor architecture that drives efficient spatial charge separation. Consequently, Zn‐HTT achieves a high hydrogen peroxide (H 2 O 2 ) photosynthesis rate of 21.9 mmol g −1 h −1 and delivers 94.5% yield of N‐benzylbenzaldimine from the benzylamine photooxidation, significantly outperforming Zn‐HTD (14.2 mmol g −1 h −1 ; 85.6% yield). Mechanistic studies confirm that the Zn–Salen sites serve as superior electron‐accepting and O 2 ‐activating centers, enabling strong *OO intermediate adsorption and highly selective two‐electron oxygen reduction to H 2 O 2 . Moreover, Zn‐HTT exhibits better stability, retaining >91% activity over 10 cycles and showing enhanced thermal resilience, attributable to the robust chelating Zn–Salen linkages. This work demonstrates that integrating metallo–Salen motifs into multidentate 2D MOFs is a viable strategy to boost photocatalytic activity, selectivity, and durability in solar‐driven synthesis.