Fabrication and Wettability Analysis of Hydrophobic Stainless Steel Surfaces With Microscale Structures From Nanosecond Laser Machining
- 22 June 2018
- journal article
- research article
- Published by ASME International in Journal of Micro and Nano-Manufacturing
- Vol. 6 (3) , 031006
Abstract
In this work, nanosecond laser machining is used to fabricate hydrophobic 17-4 PH stainless steel surfaces with microscale and submicron structures. Four surface structures were designed, with microscale channels and pillars (100 μm pitch size) of uniform heights (100 μm) or alternating heights (between 100 μm and 50 μm). During fabrication, the high-power laser beams also created submicron features on top of the microscale ones, leading to hierarchical, multiscale surface structures. Detailed wettability analysis was conducted on the fabricated samples. Measured static contact angles of water on these surfaces are over 130 deg without any coating, compared to ∼70 deg on the original steel surface before laser machining. Slightly lower contact angle hysteresis was also observed on the laser machined surfaces. Overall, these results agree with a simple Cassie–Baxter model for wetting that assumes only fractional surface area contact between the droplet and the surface. This work demonstrates that steel surfaces machined with relatively inexpensive nanosecond laser can achieve excellent hydrophobicity even with simple microstructural designs.Keywords
Funding Information
- Research and Development Corporation of Newfoundland and Labrador (5404.1891.102)
- Research and Development Corporation of Newfoundland and Labrador (C15-03)
This publication has 33 references indexed in Scilit:
- Patterned tailored hydrophobic films designed by synergy effect of electrochemical deposition and chemical depositionChemical Communications, 2013
- Bioinspired self-cleaning surfaces with superhydrophobicity, superoleophobicity, and superhydrophilicityRSC Advances, 2012
- The super hydrophobicity of ZnO nanorods fabricated by electrochemical deposition methodApplied Surface Science, 2011
- Corrosion resistance and chemical stability of super-hydrophobic film deposited on magnesium alloy AZ31 by microwave plasma-enhanced chemical vapor depositionElectrochimica Acta, 2010
- Self-Cleaning Antireflective Coatings Assembled from Peculiar Mesoporous Silica NanoparticlesLangmuir, 2010
- Drag reduction in turbulent flows over superhydrophobic surfacesPhysics of Fluids, 2009
- Drag Reduction on a Patterned Superhydrophobic SurfacePhysical Review Letters, 2006
- Fabrication of Tunable Superhydrophobic Surfaces by Nanosphere LithographyChemistry of Materials, 2004
- Investigation of micro-EDM material removal characteristics using single RC-pulse dischargesJournal of Materials Processing Technology, 2003
- Wettability of porous surfacesTransactions of the Faraday Society, 1944