Directional Measurements and Propagation Models at 28 GHz for Reliable Factory Coverage

Authors:

Abstract
Directional measurements of over 2600 links in four distinct factories at 28 GHz are used to formulate path gain and azimuth gain models to allow reliable 90% coverage estimates. A simple theoretical model of path gain, dependent on ceiling and clutter heights, is found to represent path gain across the 4 factories with 4.4 dB RMSE, contrasted with 6.9 dB slope-intercept fit and 8.5 to 14.9 dB RMSE for 3GPP factory models. The model also did well against 3.5 GHz path loss data collected over 18 MHz bandwidth in one of the factories, with RMSE of 3.3 dB. In non-line-of-sight conditions, scattering reduces available antenna azimuth gain from nominal value by up to 7.3 dB in 90% of links. Line of sight blockage by a 1.7 m × 1 m obstacle in factory aisle leads to 7 dB signal reduction, attributed to availability of other paths. It is found that an Access Point (AP) using 25 dBm transmit power per polarization, with 23 dBi nominal gain and omnidirectional terminals, supporting 2×2 MIMO in 400 MHz bandwidth, can provide 130 Mbps for 90% of factory locations within 50 m.
Funding Information
  • Chilean Research Agency ANID (PIA/APOYO AFB180002, ANID/REDES 180144)
  • Chilean Research Agency ANID (ANID FONDECYT 1211368, ANID FONDEQUIP EQM190023, ANID PIA/APOYO AFB180002)
  • project (VRIEA-PUCV 039.437/2020)

This publication has 7 references indexed in Scilit: