Effect of Bi Content on Microstructure, Mechanical Property, and Corrosion Behavior of Al–Zn–Mg–Cu–Sc–Zr Alloy
- 28 July 2025
- journal article
- Published by Wiley in Steel Research International
- Vol. 97 (2) , 796-804
Abstract
The effects of bismuth (Bi) content on the microstructure, mechanical, and corrosion behaviors of Al–Zn–Mg–Cu–Sc–Zr–Bi are systematically investigated. Al–Zn–Mg–Cu–Sc–Zr–Bi alloys with Bi content ranging from 0 to 0.5 wt% are synthesized via casting. The addition of Bi significantly refines the grain size from 52.6 to 23.2 nm, promoting the discontinuous precipitation of second phase particles along grain boundaries for Bi contents of 0.3–0.5 wt%. These Bi‐rich particles are identified through scanning electron microscopy/energy dispersive spectroscopy analysis. The tensile strength is substantially enhanced, with the synthesized alloy with 0.3 wt% of Bi achieving the highest 367.42 MPa. This improvement is attributed to lattice distortion caused by Bi dissolution and the Hall–Petch effect. However, excessive Bi content (>0.3 wt%) leads to stress concentration at grain boundaries, reducing tensile strength. Moreover, the synthesized alloy with 0.2 wt% of Bi exhibits the highest corrosion resistance, as indicated by electrochemical impedance spectroscopy results, which suggests improved capacitive characteristics due to Bi addition. This work highlights the potential of Bi as a microalloying element to optimize mechanical and corrosion properties of Al–Zn–Mg–Cu, offering a valuable insight for developing high‐performance structural materials with enhanced strength and corrosion resistance.Keywords
This publication has 43 references indexed in Scilit:
- Understanding the influence of high-strength submicron precipitate on the fracture performance of additively-manufactured aluminum alloyInternational Journal of Plasticity, 2025
- An extended criterion for hot cracking susceptibility of Al-Li alloysEngineering Failure Analysis, 2025
- Comparative analysis of processing technology on the deformation behavior of Al alloys studied by synchrotron X-ray diffraction and tomographyInternational Journal of Plasticity, 2025
- Microstructure evolution and electrochemical corrosion behavior of FeCrCoNiMoB1.1Si1.2 high-entropy alloy coating via laser claddingElectrochimica Acta, 2024
- Achieving superior strength-ductility balance by tailoring dislocation density and shearable GP zone of extruded Al-Cu-Li alloyInternational Journal of Plasticity, 2024
- Corrosion behavior of Mg–Bi–Ca alloys prepared via high vacuum melting as biodegradable materials in Hank solutionInternational Journal of Electrochemical Science, 2024
- Impact of intermetallic phases on the localised pitting corrosion and high-temperature tensile strength of Al–Si Mg Cu Ni alloysCorrosion Science, 2024
- Developing a high‐performance Al–Mg–Si–Sn–Sc alloy for essential room‐temperature storage after quenching: aging regime design and micromechanismsRare Metals, 2023
- New insights on corrosion behavior of aging precipitates in dilute Mg-Al-Ca alloy by experiments and first-principles calculationsCorrosion Science, 2023
- Phase transformations in commercial cold-rolled Al–Zn–Mg–Cu alloys with Sc and Zr additionJournal of Thermal Analysis and Calorimetry, 2020