Effect of Passive Flow Control Devices on Base Pressure for Mach Numbers Between 0.5 and 1.4
- 13 August 2021
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 144 (2)
Abstract
Experimental studies are carried out on an axisymmetric cylindrical base body for six freestream Mach numbers between 0.54 and 1.41. Unsteady pressure is measured on the base surface using high-frequency response Kulite pressure transducers. The effect of passive flow control devices on the mean base pressure and the unsteady characteristics of base pressure have been studied. A blunt base, a conventional cavity device, and three different ventilated cavity devices have been tested along with four different rounded base lip devices. A total of 20 different base geometric modifications are tested at 6 freestream Mach numbers resulting in 120 test cases. The cavity devices improve the base pressure as compared to the blunt base case, particularly for freestream Mach numbers more than 0.98. Among all the cases considered, a maximum increase of 8.6% in the base pressure coefficient is noticed for the normal ventilated cavity device as compared to the blunt base case for freestream Mach number of 1.22. The power spectral density of base pressure fluctuations revealed the dominant peaks on the base surface. The Strouhal number associated with the coherent structures developing in the shear layer varies between 0.2 and 0.27 for the six freestream Mach numbers considered. In the presence of cavity devices, dominant peaks are observed for Strouhal numbers between 1 and 5. The root-mean-square, skewness, kurtosis of the base pressure fluctuations for all the cases are presented. Maximum reduction in base pressure fluctuation is observed for the normal and inclined ventilated cavity device configuration test cases.Keywords
This publication has 26 references indexed in Scilit:
- The Effect of the Mach Number on a Turbulent Backward-Facing Step FlowFlow, Turbulence and Combustion, 2018
- Separation control and drag reduction for boat-tailed axisymmetric bodies through contoured transverse groovesJournal of Fluid Mechanics, 2017
- Control of base pressure for a boat-tailed axisymmetric afterbody via base geometry modificationsAerospace Science and Technology, 2015
- Spatio-temporal and modal analysis of unsteady fluctuations in a high-subsonic base flowPhysics of Fluids, 2014
- Drag reduction of a 3D bluff body using plasma actuatorsInternational Journal of Aerodynamics, 2011
- Unsteadiness of an axisymmetric separating-reattaching flow: Numerical investigationPhysics of Fluids, 2007
- Sub-Boundary-Layer Disturbance Effects on Supersonic Base-Pressure FluctuationsJournal of Spacecraft and Rockets, 2005
- The Effect of Base Bleed on the Flow behind a Two-Dimensional Model with a Blunt Trailing EdgeAeronautical Quarterly, 1967
- The Effect of a Rear-Mounted Disc on the Drag of a Blunt-Based Body of RevolutionAeronautical Quarterly, 1965
- A Theory for Base Pressures in Transonic and Supersonic FlowJournal of Applied Mechanics, 1956