High tensile strength and transformation-induced plasticity in bulk polycrystalline omega titanium
Preprint
- 28 July 2025
- preprint
- Published by Springer Nature in Research Square
Abstract
Titanium and its alloys exhibit advantageous ductility and strength-to-weight ratios, which makes them suitable for use as structural materials in numerous industrial applications. The wphase has been observed to precipitate during the aging process of titanium alloys, resulting in a loss of ductility. Here we report tensile behavior of bulk polycrystalline w-titanium with a chemical composition of commercially pure titanium grade 4 and an average grain size of 3.4 mm. We observed that stress-induced w → α martensitic phase transformation occurs exclusively in the plastic regime. As plastic deformation proceeds, the volume fraction of a-phase increases. The 0.2% offset yield strength, tensile strength, and elongation to failure were determined to be 1130 ± 30 MPa, 1220 ± 30 MPa, and 16 ± 2 %, respectively. These mechanical properties are comparable to those of a titanium alloy Ti-6Al-4V. The present study revealed transformation-induced plasticity in bulk polycrystalline w-titanium.Keywords
All Related Versions
- Version 1, 2025-07-28, Research Square
- Published version: Scientific Reports, 16 (1).
This publication has 45 references indexed in Scilit:
- Oxygen effects on the mechanical properties and lattice strain of Ti and Ti-6Al-4VMetals and Materials International, 2011
- Special features of formation of omega-phase in titanium alloys due to hardeningMetal Science and Heat Treatment, 2011
- Processing Pure Ti by High-Pressure Torsion in Wide Ranges of Pressures and StrainMetallurgical and Materials Transactions A, 2009
- Analytic description of the formation of pores under conditions of steady-state creep of metalsStrength of Materials, 2007
- The orientation relationship between the α- and ω-phases of titanium and zirconiumPhysica Status Solidi (a), 1973
- The effect of omega phase on the mechanical properties of titanium alloysMetallurgical Transactions, 1971
- Omega phase embrittlement in aged Ti-VMetallurgical Transactions, 1970
- The formation of omega phase in titanium and zirconium alloys: A reviewJournal of Materials Science, 1969
- Theory of the formation of lattice defects during plastic strainActa Metallurgica, 1955
- Effects of three interstitial solutes (nitrogen, oxygen, and carbon) on the mechanical properties of high-purity, alpha titaniumJOM, 1950