Unsteady numerical studies on the internal shock structure of a cylindrical resonance tube
- 6 November 2026
- journal article
- research article
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- p. 1-22
Abstract
The present study numerically investigates the unsteady shock dynamics inside a resonance tube operating in the jet regurgitant mode. Unsteady simulations using a density-based solver were conducted to analyse the coupled interaction between the underexpanded nozzle jet and the cavity flow. The numerical model is validated with available experimental measurements by comparing the resonance frequency, cavity tip temperature and shock structure between the nozzle exit and cavity inlet. The predicted dominant frequency (∼1054 Hz) and wall temperature (∼408 K) show good agreement with experimental data, confirming the simulation’s ability to reproduce an experimentally observed resonance process. Numerical results show that the resonance process is dominated by periodic influx and efflux of the jet, accompanied by the formation, propagation and reflection of incident and reflected shock waves inside the cavity. Despite the longer duration and higher velocity influx phase, continuous near-wall outflow maintains nearly zero net mass exchange over each resonance cycle. The time spent in the influx phase is greater than that in the efflux phase. The results also show that the temperature rise inside the cavity is primarily due to shock irreversibility rather than compression of trapped gas alone. Multiple reflected shocks have been observed, and their merger is found to increase the wave speed and strengthen the pressure oscillations. A higher average speed of the incident shock wave compared to the reflected shock wave has been observed. The present study provides a detailed description of shock motion and heat generation mechanisms in cylindrical resonance tubes.Keywords
This publication has 20 references indexed in Scilit:
- Temperature rise and pressure dynamics in the early stages of Hartmann–Sprenger tube operationShock Waves, 2025
- Experimental studies on the Hartmann tubeThe Aeronautical Journal, 2024
- Experimental investigation of the effects of different internal surface features on additive-manufactured resonant igniters performanceActa Astronautica, 2024
- Effect of pipe geometry and material properties on flow characteristics and thermal performance of a conical Hartmann–Sprenger tubeJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2017
- The powered resonance tube: From Hartmann's discovery to current active flow control applicationsProgress in Aerospace Sciences, 2009
- Parametric study of the Hartmann–Sprenger tubeExperiments in Fluids, 2005
- ON THE JET REGURGITANT MODE OF A RESONANT TUBEJournal of Sound and Vibration, 2001
- Experimental investigation of flow and heating in a resonance tubeJournal of Fluid Mechanics, 1979
- Etude des phenomenes thermiques dans un tube de Hartmann-SprengerInternational Journal of Heat and Mass Transfer, 1973
- On a New Method for the Generation of Sound-WavesPhysical Review B, 1922