Shambhoo Yadav
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shambhoo Yadav has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Prathima Yamasani
2 shared publications- Sudarshan Kumar
Indian Institute of Technology Bombay
2 shared publications - C. Rajashekar
CSIR-National Aerospace Laboratories
1 shared publication H. S. Raghukumar
CSIR-National Aerospace Laboratories
1 shared publicationJ. J. Isaac
CSIR-National Aerospace Laboratories
1 shared publicationK. Ashirvadam
DRDO
1 shared publication
Latest Publications
- 6 November 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- p. 1-22
Unsteady numerical studies on the internal shock structure of a cylindrical resonance tube
The present study numerically investigates the unsteady shock dynamics inside a resonance tube operating in the jet regurgitant mode. Unsteady simulations using a density-based solver were conducted to analyse the coupled interaction between the underexpanded nozzle jet and the cavity flow. The numerical model is validated with available experimental measurements by comparing the resonance frequency, cavity tip temperature and shock structure between the nozzle exit and cavity inlet. The predicted dominant frequency (∼1054 Hz) and wall temperature (∼408 K) show good agreement with experimental data, confirming the simulation’s ability to reproduce an experimentally observed resonance process. Numerical results show that the resonance process is dominated by periodic influx and efflux of the jet, accompanied by the formation, propagation and reflection of incident and reflected shock waves inside the cavity. Despite the longer duration and higher velocity influx phase, continuous near-wall outflow maintains nearly zero net mass exchange over each resonance cycle. The time spent in the influx phase is greater than that in the efflux phase. The results also show that the temperature rise inside the cavity is primarily due to shock irreversibility rather than compression of trapped gas alone. Multiple reflected shocks have been observed, and their merger is found to increase the wave speed and strengthen the pressure oscillations. A higher average speed of the incident shock wave compared to the reflected shock wave has been observed. The present study provides a detailed description of shock motion and heat generation mechanisms in cylindrical resonance tubes.
- 6 November 2026
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- p. 1-22
Unsteady numerical studies on the internal shock structure of a cylindrical resonance tube
The present study numerically investigates the unsteady shock dynamics inside a resonance tube operating in the jet regurgitant mode. Unsteady simulations using a density-based solver were conducted to analyse the coupled interaction between the underexpanded nozzle jet and the cavity flow. The numerical model is validated with available experimental measurements by comparing the resonance frequency, cavity tip temperature and shock structure between the nozzle exit and cavity inlet. The predicted dominant frequency (∼1054 Hz) and wall temperature (∼408 K) show good agreement with experimental data, confirming the simulation’s ability to reproduce an experimentally observed resonance process. Numerical results show that the resonance process is dominated by periodic influx and efflux of the jet, accompanied by the formation, propagation and reflection of incident and reflected shock waves inside the cavity. Despite the longer duration and higher velocity influx phase, continuous near-wall outflow maintains nearly zero net mass exchange over each resonance cycle. The time spent in the influx phase is greater than that in the efflux phase. The results also show that the temperature rise inside the cavity is primarily due to shock irreversibility rather than compression of trapped gas alone. Multiple reflected shocks have been observed, and their merger is found to increase the wave speed and strengthen the pressure oscillations. A higher average speed of the incident shock wave compared to the reflected shock wave has been observed. The present study provides a detailed description of shock motion and heat generation mechanisms in cylindrical resonance tubes.
- 22 April 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (9)
Estimation of the velocity field for a hydrogen fuelled valveless pulsejet using optical flow and shadowgraph
High-speed shadowgraph imaging combined with optical flow analysis is used to obtain high resolution, time resolved velocity fields in a hydrogen fuelled valveless pulsejet engine. The experiments were conducted using a rectangular cross-section pulsejet engine, with shadowgraph images acquired at 8000 frames per second and an exposure time of 3 µs. Optical flow velocities around pulsejet engine inlet and exhaust were extracted using a physics based variational formulation and converted from image plane units to physical units using spatial calibration and the known inter-frame time. Optical flow validation using a synthetic Oseen vortex pair demonstrated good agreement with analytical solutions, yielding a normalized root mean square velocity error of 1.68%. The optical flow analysis was able to successfully capture flow features of the pulsejet engine cycle. The initial flame front propagation at the inlet reached a peak velocity of 73.2 m/s. During the exhaust phase, the maximum axial velocity at the tail exit was approximately 155 m/s, while the peak suction velocity during the intake phase was -52 m/s. A classical ring vortex was identified at the tail moving downstream with maximum velocity of 69 m/s. The results demonstrate that optical flow applied to high-speed shadowgraph imaging provides reliable quantitative velocity field in highly unsteady reacting flows. Optical flow method's ability to directly estimate vortex size, convective speed, and pulsejet engine flow features from shadowgraph images offers a practical tool for improved understanding of thermoacoustic and combustion instabilities.
- 22 April 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (9)
Estimation of the velocity field for a hydrogen fuelled valveless pulsejet using optical flow and shadowgraph
High-speed shadowgraph imaging combined with optical flow analysis is used to obtain high resolution, time resolved velocity fields in a hydrogen fuelled valveless pulsejet engine. The experiments were conducted using a rectangular cross-section pulsejet engine, with shadowgraph images acquired at 8000 frames per second and an exposure time of 3 µs. Optical flow velocities around pulsejet engine inlet and exhaust were extracted using a physics based variational formulation and converted from image plane units to physical units using spatial calibration and the known inter-frame time. Optical flow validation using a synthetic Oseen vortex pair demonstrated good agreement with analytical solutions, yielding a normalized root mean square velocity error of 1.68%. The optical flow analysis was able to successfully capture flow features of the pulsejet engine cycle. The initial flame front propagation at the inlet reached a peak velocity of 73.2 m/s. During the exhaust phase, the maximum axial velocity at the tail exit was approximately 155 m/s, while the peak suction velocity during the intake phase was -52 m/s. A classical ring vortex was identified at the tail moving downstream with maximum velocity of 69 m/s. The results demonstrate that optical flow applied to high-speed shadowgraph imaging provides reliable quantitative velocity field in highly unsteady reacting flows. Optical flow method's ability to directly estimate vortex size, convective speed, and pulsejet engine flow features from shadowgraph images offers a practical tool for improved understanding of thermoacoustic and combustion instabilities.
- 1 July 2015
- Published by Elsevier in Energy Conversion and Management
- Vol. 99, 1-7
Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor
- 1 July 2015
- Published by Elsevier in Energy Conversion and Management
- Vol. 99, 1-7
Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor
- 24 March 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 104 (12) , 123903
A prototype micro-thermoelectric power generator for micro-electromechanical systems
A prototype micro-thermoelectric power generator (micro-TEG) system based on micro-combustion concept has been developed and presented here. The system consists of Bismuth-Telluride based thermoelectric modules mounted on a 0.5 cm3 volume microcombustor. The hot combustion gases from the microcombustor are allowed to flow in reverse direction through a heating cup to maximize the heat transfer from hot combustion products to thermoelectric modules. The system delivers a maximum power of 2.35 W with a fuel (propane) flow rate of 3.98 g/h. Maximum power is achieved at a voltage of 4.34 V, current 0.54 A with a maximum conversion efficiency of 4.58%. The system generates electric power with an improvement of over 83% in energy conversion efficiency over existing micro-TEG systems.
- 24 March 2014
- Published by AIP Publishing in Applied Physics Letters
- Vol. 104 (12) , 123903
A prototype micro-thermoelectric power generator for micro-electromechanical systems
A prototype micro-thermoelectric power generator (micro-TEG) system based on micro-combustion concept has been developed and presented here. The system consists of Bismuth-Telluride based thermoelectric modules mounted on a 0.5 cm3 volume microcombustor. The hot combustion gases from the microcombustor are allowed to flow in reverse direction through a heating cup to maximize the heat transfer from hot combustion products to thermoelectric modules. The system delivers a maximum power of 2.35 W with a fuel (propane) flow rate of 3.98 g/h. Maximum power is achieved at a voltage of 4.34 V, current 0.54 A with a maximum conversion efficiency of 4.58%. The system generates electric power with an improvement of over 83% in energy conversion efficiency over existing micro-TEG systems.