Ignition of Wood-Based Boards by Radiant Heat
Open Access
Abstract
Particleboards (PB) and oriented strand boards (OSB) are commonly used materials in building structures or building interiors. The surface of boards may hence become directly exposed to fire or radiant heat. The aim of this paper is to evaluate the behaviour of uncoated particleboards and OSB exposed to radiant heat. The following ignition parameters were used to observe the process of particleboard and OSB ignition: heat flux intensity (from 43 to 50 kW.m-2) and ignition temperature. The time-to-ignition and mass loss of particleboards and OSB with thicknesses of 12, 15 and 18 mm were monitored and compared. The experiments were conducted on a modified device in accordance with ISO 5657: 1997. Results confirmed thermal degradation of samples. Heat flux had a significant effect on mass loss (burning rate) and time-to-ignition. OSB had higher ignition time than particleboards and the thermal degradation of OSB started later, i.e., at a higher temperature than that of particleboards, but OSB also had higher mass loss than particleboards. The samples yielded the same results above 47 kW.m−2. Thermal analysis also confirmed a higher thermal decomposition temperature of OSB (179 °C) compared to particleboards (146 °C). The difference in mass loss in both stages did not exceed 1%.Keywords
Funding Information
- Institute Grant of University of Žilina (12716)
- Kultúrna a Edukacná Grantová Agentúra MŠVVaŠ SR (KEGA 0014UKF-4/2020)
This publication has 52 references indexed in Scilit:
- Cone calorimeter testing of foam core sandwich panels treated with intumescent paper underneath the veneer (FRV)Fire and Materials, 2017
- Behavior of the Spruce and Birch Wood from the Fire Safety Point of ViewAdvanced Materials Research, 2013
- Dimensional Stability of OSB Panels Subjected to Variable Relative Humidity: Core Layer Made with Fine Wood ChipsBioResources, 2013
- A methodology for the estimation of ignition delay times in forest fire modellingCombustion and Flame, 2012
- Thermal degradation of bending strength of plywood and oriented strand board: a kinetics approachWood Science and Technology, 2010
- Impact of drying temperature and pressing time factor on VOC emissions from OSB made of Scots pineHolzforschung, 2006
- European classes for the reaction to fire performance of wood productsEuropean Journal of Wood and Wood Products, 2006
- Charring rate of wood as a tool for fire investigationsFire Safety Journal, 2005
- Rate of Heat Release and Ignitability Indices in Predicting SBI Test ResultsJournal of Fire Sciences, 2001
- On the thermal ignition of combustible materialsFire and Materials, 1989