Influence of Strain Route Changes on the Microstructure and Mechanical Properties of CuZn36 Alloy during Cross Channel Extrusion CCE
Open Access
Abstract
This study evaluates the impact of changing the deformation routes of the extrusion process in a cross-shaped die (CCE) on the structure and properties of a CuZn36 alloy (% at.). Samples with dimensions of Ø8 × 36 mm were subjected to extrusion at room temperature according to two variants: straight extrusion in the A route (2-, 4-, 8- and 12-pass) and extrusion with interoperative rotation by 90° in the BC route (2- and 4-pass). The improvement of strength properties was obtained as a result of grain fragmentation in the CCE process. Changes in the microstructure were observed using a light microscope, and mechanical properties were measured in the microhardness test and a static tensile test. The obtained results showed that the mechanical properties of the alloy depend on the number of passes and the material deformation route. This observation was related to the fragmentation of its structure and strengthening, which resulted in changes in its properties. The highest strength was characterized by the material pressed four times with the rotation of 90° (BC route), whose properties were comparable and even slightly better than the material squeezed twelve times without rotation (A route).Keywords
This publication has 58 references indexed in Scilit:
- Grain Refinement of Magnesium Alloys by CONFORM: A Continuous Severe Plastic Deformation Route?Materials Science Forum, 2012
- The Effect of the Strain Path and the Second Phase Particles on the Microstructure and the Texture Evolution of the AA3104 Alloy Processed by ECAPArchives of Metallurgy and Materials, 2011
- Plastic deformation characteristics of cross-equal channel angular pressingComputational Materials Science, 2008
- Using high-pressure torsion for metal processing: Fundamentals and applicationsProgress in Materials Science, 2008
- Effects of cross-channel extrusion on the microstructures and superplasticity of a Zn–22wt.% Al eutectoid alloyScripta Materialia, 2007
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Matrix grain refinement in Al–TiAl composites by severe plastic deformation: Influence of particle size and processing routeMaterials Science and Engineering: A, 2006
- KOBO Type Forming: forging of metals under complex conditions of the processJournal of Materials Processing Technology, 2003
- The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAEActa Materialia, 2000
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000