A New Converter Concept Providing Improved Flow Distribution and Space Utilization
Authors:
- 1 March 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A new converter concept is introduced, which utilizes the additional space in the inlet cone of the converter. An optimized design is obtained by the application of computational fluid dynamics (CFD) and flow distribution measurements, resulting in up to 20% improved flow distribution through the substrate. In addition, the volume of the converter can be increased by approximately 15% using the same space envelope. Durability tests of the converter system have been performed using a thermal cycling test on an engine test bench for 135 hours. No deterioration of the substrate or mounting system occurred. The emissions performance was evaluated on a stationary dynamometer. The impact of the flow distribution on the temperature field and the conversion behavior during light-off and steady state operation were investigated. Under the current testing conditions, no differences in light-off behavior were determined, despite significant differences in the temperature field. Both improved flow distribution and increased converter volume contributed to better steady-state performance.Keywords
This publication has 9 references indexed in Scilit:
- Performance of Different Cell Structure Converters A Total Systems PerspectiveSAE International Journal of Advances and Current Practices in Mobility, 1998
- Development of the Ultra Low Heat Capacity and Highly Insulating (ULOC) Exhaust Manifold for ULEVSAE International Journal of Advances and Current Practices in Mobility, 1998
- Effect of Flow Distribution on Emissions Performance of Catalytic ConvertersSAE International Journal of Advances and Current Practices in Mobility, 1998
- New Ultra Thin Wall Metal Catalysts for Close-Coupled ApplicationsSAE International Journal of Advances and Current Practices in Mobility, 1998
- Development of the High Performance L4 Engine ULEV SystemSAE International Journal of Advances and Current Practices in Mobility, 1998
- Demonstration of High Temperature Durability for Oval Ceramic Catalytic Converters-2SAE International Journal of Advances and Current Practices in Mobility, 1998
- Advanced Ceramic Substrate: Catalytic Performance Improvement by High Geometric Surface Area and Low Heat CapacitySAE International Journal of Advances and Current Practices in Mobility, 1997
- Hot Vibration Durability of Ceramic PreconvertersSAE International Journal of Advances and Current Practices in Mobility, 1995
- Optimisation of Catalytic Converter Gas Flow Distribution by CFD PredictionSAE International Journal of Advances and Current Practices in Mobility, 1993