Shoulder-attached cavity dynamics and hydrodynamic characteristics of underwater vehicles
- 1 December 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Abstract
When an underwater vehicle rapidly exits the storage tube, the residual gas near the tube mouth forms an attached cavity around the shoulder of the vehicle. This cavity significantly influences the motion stability and hydrodynamic loading of the vehicle. In this study, numerical simulations were conducted to investigate the formation mechanism of the attached cavity and to evaluate the effects of various head shapes on the evolution of the transient flow field and the hydrodynamic performance of the vehicle. The results indicate that flow separation at the shoulder initiates the development of the attached cavity. The subsequent shedding of the cavity induces a periodic hairpin vortex and strong pressure fluctuations. As the shoulder geometry becomes more streamlined, the gas volume within the cavity decreases, the asymmetry becomes more pronounced, and the cavity shedding mode changes. The dominant shedding frequency tends to increase, while the amplitude diminishes, indicating a transition toward a more unstable flow state, with an intermediate configuration likely exhibiting a transitional regime in which multiscale shedding coexists. This complex evolution of the cavity directly affects the overall hydrodynamic loading characteristics of the vehicle. This study offers a significant reference point for the prediction of multiphase cavitating flows and the design of motion stability of underwater vehicles.Keywords
Funding Information
- The Education Innovation Group Joint Fund (No.8091B042205)
This publication has 38 references indexed in Scilit:
- Experimental and numerical study on flow dynamics and universal characteristics of ventilated supercavities behind different cavitatorsInternational Journal of Naval Architecture and Ocean Engineering, 2024
- Experimental investigation of ventilated supercavitation behind cone-shaped with different angles and disk-shaped cavitatorsInternational Journal of Naval Architecture and Ocean Engineering, 2022
- Numerical modeling and simulation of the shedding mechanism and vortex structures at the development stage of ventilated partial cavitating flowsEuropean Journal of Mechanics - B/Fluids, 2019
- Experimental Investigation of the Characteristics of an Artificial Cavity During the Water-Exit of a Slender BodyJournal of Marine Science and Application, 2018
- Experimental investigation of ventilated partial cavitating flows with special emphasis on flow pattern regime and unsteady shedding behavior around an axisymmetric body at different angles of attackOcean Engineering, 2018
- An experimental investigation of artificial supercavitation generated by air injection behind disk-shaped cavitatorsInternational Journal of Naval Architecture and Ocean Engineering, 2017
- On the internal collapse phenomenon at the closure of cavitation bubbles in a deceleration process of underwater vertical launchingApplied Ocean Research, 2016
- Investigation of cavitation around 3D hemispherical head-form body and conical cavitators using different turbulence and cavitation modelsOcean Engineering, 2016
- Numerical investigation on the cavitation collapse regime around the submerged vehicles navigating with decelerationEuropean Journal of Mechanics - B/Fluids, 2015
- Numerical simulation of 3-D incompressible, multi-phase flows over cavitating projectilesEuropean Journal of Mechanics - B/Fluids, 2004