Numerical and experimental investigations of the shaft-clinching assembly process of automobile wheel-hub-bearing units
Authors:
- 6 August 2016
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 230 (13) , 1741-1757
Abstract
A shaft-clinching process aimed at developing a lightweight, integrated and highly reliable assembly is a very effective technique for the assembly of hub-bearing units. In this study, a reliable elastic–plastic finite element model of the shaft-clinching assembly process was developed by using the Abaqus platform and was applied to simulate the shaft-clinching assembly process of automobile wheel-hub-bearing units. To ensure the precision of the developed finite element model, the motion equations of the rivet head during the shaft-clinching process were obtained on the basis of theoretical derivation, on-site testing and the structural parameters of the equipment. Further, a series of experiments was performed for identifying the mechanical properties of the investigated material and the realistic friction conditions existing at the rivet head–workpiece interface. Based on the obtained reliable preprocessing data, the developed finite element model was used to simulate the shaft-clinching assembly process. Subsequently, the finite element model was validated using experiments on the shaft clinching of a wheel-hub-bearing unit. Comparison between the simulation results and the experimental results in terms of the axial clinching force–time curve and the ultimate deformed shape of the hub shaft showed good agreement, thereby validating the developed model. Finally, the influences of the axial distance between the upper surface of the inner ring and the forming surface of the rivet head, the friction factor, the radius ratio of the internal gear to the external gear and the maximum inclination angle of the rivet head on the clinching process were studied. The results of this study are expected to aid optimization of the shaft-clinching assembly process.Keywords
This publication has 21 references indexed in Scilit:
- Friction behaviors in cold rotary forging of 20CrMnTi alloyTribology International, 2012
- Prediction of contact pressure, slip distance and wear in cold rotary forging using finite element methodsTribology International, 2011
- Numerical and experimental investigation of cold rotary forging of a 20CrMnTi alloy spur bevel gearMaterials & Design (1980-2015), 2011
- Material parameters in a simulation of metal sheet stampingProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2009
- Gas dynamics analysis of an air pocket in the metal-stamping processProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2008
- The die failure prediction and prevention of the orbital forging processJournal of Materials Processing Technology, 2008
- Kinematic and sensitivity analysis of rotary forging process by means of a simulation modelInternational Journal of Material Forming, 2008
- Recent development in orbital forging technologyInternational Journal of Material Forming, 2008
- Incremental Bulk Metal FormingCIRP Annals, 2007
- A photo-plastic experimental study on deformation of rotary forging a ring workpieceJournal of Materials Processing Technology, 2005