Jie Qu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jie Qu has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jiangtao Xu
Tsinghua University
2 shared publications BingYe Xu
Tsinghua University
1 shared publicationGuojie Zhang
School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, People’s Republic of China
1 shared publication- Guojie Zhang
School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640, China
1 shared publication - Haitao Xu
Shenyang Institute of Automation, Chinese Academy of Sciences
1 shared publication Huang Meihua
1 shared publication
Latest Publications
- 17 March 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 640
Feature selection of battery capacity estimation method based on deep learning
- 17 March 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 640
Feature selection of battery capacity estimation method based on deep learning
- 1 January 2024
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 60 (22) , 329-339
Development and Test Verification of Lithium-ion Battery Bulk Force Test Bench
- 1 January 2024
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 60 (22) , 329-339
Development and Test Verification of Lithium-ion Battery Bulk Force Test Bench
- 22 September 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (23) , 7202-7240
Adaptive multi‐surrogate‐based constrained optimization method and its application
This article presents an adaptive multi‐surrogate constrained optimization method (AMSCOM) that can automatically determine the appropriate metamodel for each black‐box function in the constrained optimization problem (COP) and concurrently find the optimum. In AMSCOM, each black‐box function is approximated initially by several different types of candidate surrogates. Then, as optimization progresses, the poorly performing candidate surrogates of each black‐box function are gradually eliminated until the appropriate surrogate is found. Meanwhile, as more than one candidate surrogate exists for each unknown function in the optimization process, multiple approximate optimization problems (AOPs) can be constructed, and new samples can be obtained by solving these AOPs. Additionally, we employ the genetic operator and the local‐linear approximation–Voronoi method to generate new samples. To verify the effectiveness and investigate several properties of AMSCOM, the proposed method is tested on 12 benchmark COPs and compared with several single surrogate‐based methods. Furthermore, AMSCOM is compared with several published surrogate‐based constrained optimization methods, and the results further prove the superior performance of AMSCOM. The proposed method is then employed to optimize the shaft‐clinching process of wheel‐hub‐bearing units, and a desirable result is achieved.
- 22 September 2021
- Published by Wiley in International Journal for Numerical Methods in Engineering
- Vol. 122 (23) , 7202-7240
Adaptive multi‐surrogate‐based constrained optimization method and its application
This article presents an adaptive multi‐surrogate constrained optimization method (AMSCOM) that can automatically determine the appropriate metamodel for each black‐box function in the constrained optimization problem (COP) and concurrently find the optimum. In AMSCOM, each black‐box function is approximated initially by several different types of candidate surrogates. Then, as optimization progresses, the poorly performing candidate surrogates of each black‐box function are gradually eliminated until the appropriate surrogate is found. Meanwhile, as more than one candidate surrogate exists for each unknown function in the optimization process, multiple approximate optimization problems (AOPs) can be constructed, and new samples can be obtained by solving these AOPs. Additionally, we employ the genetic operator and the local‐linear approximation–Voronoi method to generate new samples. To verify the effectiveness and investigate several properties of AMSCOM, the proposed method is tested on 12 benchmark COPs and compared with several single surrogate‐based methods. Furthermore, AMSCOM is compared with several published surrogate‐based constrained optimization methods, and the results further prove the superior performance of AMSCOM. The proposed method is then employed to optimize the shaft‐clinching process of wheel‐hub‐bearing units, and a desirable result is achieved.
- 1 January 2017
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 53 (20) , 89-97
Research on the Mechanical Properties of Rigid Polyurethane Foam in the Multiaxial Compression Experiment
- 1 January 2017
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 53 (20) , 89-97
Research on the Mechanical Properties of Rigid Polyurethane Foam in the Multiaxial Compression Experiment
- 6 August 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 230 (13) , 1741-1757
Numerical and experimental investigations of the shaft-clinching assembly process of automobile wheel-hub-bearing units
A shaft-clinching process aimed at developing a lightweight, integrated and highly reliable assembly is a very effective technique for the assembly of hub-bearing units. In this study, a reliable elastic–plastic finite element model of the shaft-clinching assembly process was developed by using the Abaqus platform and was applied to simulate the shaft-clinching assembly process of automobile wheel-hub-bearing units. To ensure the precision of the developed finite element model, the motion equations of the rivet head during the shaft-clinching process were obtained on the basis of theoretical derivation, on-site testing and the structural parameters of the equipment. Further, a series of experiments was performed for identifying the mechanical properties of the investigated material and the realistic friction conditions existing at the rivet head–workpiece interface. Based on the obtained reliable preprocessing data, the developed finite element model was used to simulate the shaft-clinching assembly process. Subsequently, the finite element model was validated using experiments on the shaft clinching of a wheel-hub-bearing unit. Comparison between the simulation results and the experimental results in terms of the axial clinching force–time curve and the ultimate deformed shape of the hub shaft showed good agreement, thereby validating the developed model. Finally, the influences of the axial distance between the upper surface of the inner ring and the forming surface of the rivet head, the friction factor, the radius ratio of the internal gear to the external gear and the maximum inclination angle of the rivet head on the clinching process were studied. The results of this study are expected to aid optimization of the shaft-clinching assembly process.
- 6 August 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 230 (13) , 1741-1757
Numerical and experimental investigations of the shaft-clinching assembly process of automobile wheel-hub-bearing units
A shaft-clinching process aimed at developing a lightweight, integrated and highly reliable assembly is a very effective technique for the assembly of hub-bearing units. In this study, a reliable elastic–plastic finite element model of the shaft-clinching assembly process was developed by using the Abaqus platform and was applied to simulate the shaft-clinching assembly process of automobile wheel-hub-bearing units. To ensure the precision of the developed finite element model, the motion equations of the rivet head during the shaft-clinching process were obtained on the basis of theoretical derivation, on-site testing and the structural parameters of the equipment. Further, a series of experiments was performed for identifying the mechanical properties of the investigated material and the realistic friction conditions existing at the rivet head–workpiece interface. Based on the obtained reliable preprocessing data, the developed finite element model was used to simulate the shaft-clinching assembly process. Subsequently, the finite element model was validated using experiments on the shaft clinching of a wheel-hub-bearing unit. Comparison between the simulation results and the experimental results in terms of the axial clinching force–time curve and the ultimate deformed shape of the hub shaft showed good agreement, thereby validating the developed model. Finally, the influences of the axial distance between the upper surface of the inner ring and the forming surface of the rivet head, the friction factor, the radius ratio of the internal gear to the external gear and the maximum inclination angle of the rivet head on the clinching process were studied. The results of this study are expected to aid optimization of the shaft-clinching assembly process.
- 27 October 2015
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 138 (4) , 041006
Determination of Motion Equation of Rivet Head During Shaft Riveting Assembly Process for Wheel Hub Bearing Units
The shaft riveting assembly process is a very effective method for assembling lightweight, integrated, and highly reliable automobile wheel hub bearings. This paper proposes a method to determine the motion equation of a rivet head during the shaft riveting process based on a theoretical derivation, on-site test results, and structural equipment parameters. Based on the structure of the riveting machine, the motion equation of the rivet head is deduced through the combined application of a rectangular spatial coordinate system and the Euler angle method. In addition, the axial displacement and axial riveting force of the spindle were measured during the shaft riveting process using a newly developed on-site testing system. The axial velocity of the rivet head is determined using the spline function method based on the measured axial displacement–time curve. Subsequently, the motion equation of velocity and three-axis angular velocity of the rivet head can be obtained based on the deduced motion equation of the rivet head, test data, and structural equipment parameters. Finally, the motion equation of the rivet head is validated by simulating the shaft riveting process using the finite-element (FE) method, and then comparing the simulated axial riveting force and final geometric shape of the riveted hub shaft with the experimental ones. The result shows that the method proposed in this paper lays the foundation for the numerical simulation and optimization of the shaft riveting technology for a wheel hub bearing unit.
- 27 October 2015
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 138 (4) , 041006
Determination of Motion Equation of Rivet Head During Shaft Riveting Assembly Process for Wheel Hub Bearing Units
The shaft riveting assembly process is a very effective method for assembling lightweight, integrated, and highly reliable automobile wheel hub bearings. This paper proposes a method to determine the motion equation of a rivet head during the shaft riveting process based on a theoretical derivation, on-site test results, and structural equipment parameters. Based on the structure of the riveting machine, the motion equation of the rivet head is deduced through the combined application of a rectangular spatial coordinate system and the Euler angle method. In addition, the axial displacement and axial riveting force of the spindle were measured during the shaft riveting process using a newly developed on-site testing system. The axial velocity of the rivet head is determined using the spline function method based on the measured axial displacement–time curve. Subsequently, the motion equation of velocity and three-axis angular velocity of the rivet head can be obtained based on the deduced motion equation of the rivet head, test data, and structural equipment parameters. Finally, the motion equation of the rivet head is validated by simulating the shaft riveting process using the finite-element (FE) method, and then comparing the simulated axial riveting force and final geometric shape of the riveted hub shaft with the experimental ones. The result shows that the method proposed in this paper lays the foundation for the numerical simulation and optimization of the shaft riveting technology for a wheel hub bearing unit.
- 4 October 2008
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 51 (11) , 1722-1732
Parameter identification theory of a complex model based on global optimization method
- 4 October 2008
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 51 (11) , 1722-1732
Parameter identification theory of a complex model based on global optimization method