Unified Analysis of Winding Connection Sequence in Series-End Winding Topology
- 22 October 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (1) , 516-527
Abstract
The series-end winding topology (SWT) can be seen as an evolution from the open-end winding topology (OWT). Through leg-sharing technology, it has significant advantages in terms of the device count and other features. In this article, for the first time, the rules of winding connection sequence (WCS) in SWT with different phase numbers are deduced, and the effect of WCS on the performance of multiphase SWT is studied. An important conclusion is that in an N-phase (N> = 3) SWT, the phase spacing Δn between adjacent connected windings must be relatively prime to N. Especially, in an odd-phase motor, when Δn = 0.5 (N - 1), the dc bus utilization can reach a maximum of two, which is the same as that in OWT. This article also clarifies the similarities and differences between the SWT, OWT, and the N-phase-leg converter topology with no neutral connection, and further clarifies the difference in the rule of WCS between the series connection and the loop connection of the phase winding. For SWT, while ensuring the freedom of full voltage control, the loss caused by the harmonic current component in the multiplexing leg is greatly reduced, especially the zero-axis current component is completely eliminated, which is its unique advantage. The principle and conclusion have been verified by the experiment with a five-phase induction motor and a nine-phase permanent magnet synchronous motor. The proposed method can increase the motor speed range to the same as that in OWT.Keywords
Funding Information
- National Natural Science Foundation of China (51877091)
This publication has 17 references indexed in Scilit:
- A Space Vector PWM With Common-Mode Voltage Elimination for Open-End Winding Five-Phase Drives With a Single DC SupplyIEEE Transactions on Industrial Electronics, 2013
- Effect of Stator Winding Connection on Performance of Five-Phase Induction MachinesIEEE Transactions on Industrial Electronics, 2013
- A Dual Five-Phase Space-Vector Modulation Algorithm Based on the Decomposition MethodIEEE Transactions on Industry Applications, 2012
- On the Causes of Circulating Currents in PWM Drives With Open-End Winding AC MachinesIEEE Transactions on Industrial Electronics, 2012
- Investigation of Carrier-Based PWM Techniques for a Five-Phase Open-End Winding Drive TopologyIEEE Transactions on Industrial Electronics, 2012
- Wide Operational Speed Range of Five-Phase Permanent Magnet Machines by Using Different Stator Winding ConfigurationsIEEE Transactions on Industrial Electronics, 2011
- Multiphase Electric Machines for Variable-Speed ApplicationsIEEE Transactions on Industrial Electronics, 2008
- Multiphase induction motor drives – a technology status reviewIET Electric Power Applications, 2007
- A Dual Two-Level Inverter Scheme With Common Mode Voltage Elimination for an Induction Motor DriveIEEE Transactions on Power Electronics, 2004
- New open-winding configurations for high-power inverters2002