Electrochemical corrosion behavior of biomedical Ti–22Nb and Ti–22Nb–6Zr alloys in saline medium
Authors:
- 19 October 2009
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 60 (10) , 788-794
Abstract
The aims of this study were to investigate the effects of Zr addition and potentiodynamic polarization on the microstructure and corrosion resistance of Ti–22Nb and Ti–22Nb–6Zr alloy samples. The corrosion tests were carried out in 0.9% NaCl at 37 °C and neutral pH value, utilizing the OCP, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. The results of XRD and optical microscopy indicated that the addition of Zr stabilized the β phase, which plays a crucial role in the corrosion resistance improvement of the Ti–22Nb–6Zr alloy. From the polarization curves, it can be seen that the alloys exhibited a wide passive region without the breakdown of the passive films and also low corrosion current densities. In addition, the values of the corrosion current densities and passive current densities decreased with the addition of 6 at% Zr into the Ti–22Nb alloy. The EIS results of these two alloy samples after 1‐h immersion in 0.9% NaCl solution, and being fitted by RS(QPRP) model, suggested that the corrosion resistance of the passive films improved with the addition of Zr and only a single passive film formed on the surfaces. However, two time constants were observed for the Ti–22Nb and Ti–22Nb–6Zr alloy samples after potentiodynamic polarization, the spectra of which can be fitted using the Rs(Qo(Ro(QbRb))) model. In addition, the corrosion resistance of the two alloy samples was reinforced significantly because of polarization when compared to the immersed samples. All these observations suggested a nobler electrochemical behavior of the titanium alloys with the addition of Zr element and after polarization.Keywords
This publication has 43 references indexed in Scilit:
- Electrochemical corrosion behavior of a Ti–35Nb alloy for medical prosthesesElectrochimica Acta, 2008
- Electrochemical characteristics of titanium based biomaterials in artificial salivaMaterials and Corrosion, 2007
- Electrochemical evaluation of Ti‐13Nb‐13Zr, Ti‐6Al‐4V and Ti‐6Al‐7Nb alloys for biomedical application by long‐term immersion testsMaterials and Corrosion, 2007
- A study on the hot corrosion behavior of Ti–6Al–4V alloyMaterials Letters, 2007
- Corrosion characterization of titanium alloys by electrochemical techniquesElectrochimica Acta, 2006
- Shape memory characteristics of Ti–22Nb–(2–8)Zr(at.%) biomedical alloysMaterials Science and Engineering: A, 2005
- Electrochemical characterisation of passive films on Ti alloys under simulated biological conditionsElectrochimica Acta, 2002
- Electrochemical impedance spectroscopy study of strained titanium in fluoride mediaElectrochimica Acta, 2002
- In vitro corrosion behaviour of titanium alloys without vanadiumElectrochimica Acta, 2002
- Corrosion and Passivity of Ti-13% Nb-13% Zr in Comparison to Other Biomedical Implant AlloysCorrosion, 1997