Modeling and Dynamic Simulation of a Hybrid Liquid Desiccant System with Non-Adiabatic Falling-Film Air-Solution Contactors for Air Conditioning Applications in Buildings
Open Access
Abstract
This paper presents an experimentally validated, dynamic model of a hybrid liquid desiccant system. For this purpose, we developed new components for the air-solution contactors, which are of the non-adiabatic falling-film type with horizontal tubes (made of improved polypropylene) and the solution tanks. We also provide new experimental correlations for both the tube-solution heat transfer coefficient and the mass transfer coefficient on the airside as a function of the air velocity. To validate the model, the results obtained from the dynamic simulations were compared with those obtained by monitoring a demonstration unit installed in a sports center in Taipei (Taiwan). Once validated, the model was used to perform a sensitivity analysis at different operational conditions, such as the inlet water temperatures in the air-solution contactors and the LiCl mass fraction at which the system operates. The results of the sensitivity analysis were used to optimize the seasonal performance in terms of comfort and energy required by the system. Compared with a conventional air-handling unit that controls air temperature and humidity, the annual energy savings of the liquid desiccant systems are 17%.Keywords
Funding Information
- Seventh Framework Programme (314701)
This publication has 27 references indexed in Scilit:
- Experimental performance of polymeric air-solution contactors for liquid desiccant systemsApplied Thermal Engineering, 2017
- Experimental comparison between internally and externally cooled air-solution contactorsScience and Technology for the Built Environment, 2015
- Survey of liquid desiccant dehumidification system based on integrated vapor compression technology for building applicationsEnergy and Buildings, 2013
- Survey of hybrid liquid desiccant air conditioning systemsRenewable and Sustainable Energy Reviews, 2013
- Review of solid/liquid desiccant in the drying applications and its regeneration methodsRenewable and Sustainable Energy Reviews, 2012
- Model validation and case study on internally cooled/heated dehumidifier/regenerator of liquid desiccant systemsInternational Journal of Thermal Sciences, 2009
- Review of Liquid Desiccant Technology for HVAC ApplicationsHVAC&R Research, 2008
- A technical review on use of liquid-desiccant dehumidification for air-conditioning applicationRenewable and Sustainable Energy Reviews, 2008
- Comparison between Spray Towers with and without Fin Coils for Air Dehumidification Using Triethylene Glycol Solutions and Development of the Mass-Transfer CorrelationsIndustrial & Engineering Chemistry Research, 2000
- Modelling and parametric analysis of heat and mass transfer performance of refrigerant cooled liquid desiccant absorbersInternational Journal of Energy Research, 1998