Viscoelastic, thermal and environmental characteristics of poly(lactic acid), linear low-density polyethylene and low-density polyethylene ternary blends and composites
Authors:
- 14 September 2016
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 31 (7) , 787-805
Abstract
Poly(lactic acid) (PLA)/(linear low-density polyethylene (LLDPE)–low-density polyethylene (LDPE)) PLA/(LLDPE-LDPE) ternary blends were prepared and characterized as function of the PLA content. (50/50) PLA/(LLDPE–LDPE) blend was also compatibilized using maleic anhydride grafted low-density polyethylene (PE-g-MA) incorporated with a concentration of 5 wt.%. PLA/(LLDPE–LDPE) blend composites have been prepared by dispersing 5 wt.% of an organophilic montmorillonite (Org-MMT), added according to two different mixing methods. These materials were subjected to several investigations such as X-rays diffraction (XRD), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry, and environmental tests. In the PLA glassy region, DMTA results showed that the storage modulus of PLA/(LLDPE–LDPE) blends decreases upon decreasing the PLA content. When PE-g-MA and Org-MMT were added, PLA exhibited a noticeable increase in the storage modulus across the glass transition region due the interface reinforcement and the enhancement of the blends stiffness. The decrease in the magnitude of the PLA tan δ peak was attributed to the decrease in the molecular mobility that could result from the increase in the interfacial resistance. XRD analysis showed that the method of dispersion of the nanoclay controls the final structural properties of the composites. (50/50) PLA/(LLDPE-LDPE) blend and composites revealed a satisfactory aptitude to biodegradation.Keywords
This publication has 37 references indexed in Scilit:
- Effect of clay type and loading on thermal, mechanical properties and biodegradation of poly(lactic acid) nanocompositesReactive and Functional Polymers, 2013
- A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/Epoxidized Palm Oil BlendInternational Journal of Molecular Sciences, 2012
- Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property of biodegradable PLA/PBAT blend and its nanocompositesBioresource Technology, 2010
- The influence of citric acid on the properties of thermoplastic starch/linear low-density polyethylene blendsCarbohydrate Polymers, 2007
- Properties of melt processed chitosan and aliphatic polyester blendsMaterials Science and Engineering: A, 2005
- Morphology and properties of polylactide modified by thermal treatment, filling with layered silicates and plasticizationPolymer, 2004
- DSC study of biodegradable poly(lactic acid) and poly(hydroxy ester ether) blendsThermochimica Acta, 2003
- Natural fibres as reinforcement in polylactic acid (PLA) compositesComposites Science and Technology, 2003
- Microstructure of Maleic Anhydride Grafted Polyethylene by High-Resolution Solution-State NMR and FTIR SpectroscopyMacromolecules, 2003
- Melt grafting of maleic anhydride onto low-density polyethylene/polypropylene blendsPolymer Testing, 2003