An application of (4YSZ)0.93(Fe2O3)0.07 in limiting current oxygen sensor
Open Access
- 5 April 2019
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 5745
Abstract
(4YSZ)0.93(Fe2O3)0.07 and 9 mol% Y2O3 stabilized ZrO2 (9YSZ) were synthesized by co-precipitation method and their crystalline structure, microstructure, electronic conductivity, total conductivity were characterized. A limiting current oxygen sensor was assembled with (4YSZ)0.93(Fe2O3)0.07 dense diffusion barrier and 9YSZ solid electrolyte by Pt sintered-paste method. Influences of temperature (T), oxygen concentration (x(O2)) and water vapor pressure (p(H2O)) on sensing characteristics of the limiting current oxygen sensor were investigated. The crystalline structure of (4YSZ)0.93(Fe2O3)0.07 and 9YSZ belong to cubic structure with $${\bf{Fm}}\overline{{\bf{3}}}{\bf{m}}$$ . The total conductivity of (4YSZ)0.93(Fe2O3)0.07 is higher than that of 9YSZ and the electronic and total conductivities of the samples meet the linear relationship with 1000/T. The limiting current oxygen sensor exhibits excellent sensing characteristics under test conditions. The effects of T, x(O2) and p(H2O) are as follows: Log(IL·T) depends linearly on 1000/T, IL depends linearly on x(O2) and IL is not significantly dependent on p(H2O).
Keywords
Funding Information
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China (51374055)
This publication has 23 references indexed in Scilit:
- A limiting current oxygen sensor prepared by a co-pressing and co-sintering techniqueSensors and Actuators B: Chemical, 2018
- Preparation and electrical property of CaZr0.7M0.3O3 (M = Fe, Cr and Co) dense diffusion barrier for application in limiting current oxygen sensorSensors and Actuators B: Chemical, 2018
- A review of zirconia-based solid electrolytesIonics, 2016
- A review of high-temperature electrochemical sensors based on stabilized zirconiaSolid State Ionics, 2015
- Sr0.7Ho0.3CoO3−δ as a potential cathode material for intermediate-temperature solid oxide fuel cellsJournal of Power Sources, 2012
- Limiting Current Oxygen Sensors with LSF as Dense Diffusion BarrierKey Engineering Materials, 2007
- Solid Oxide Fuel Cells: Fundamentals to SystemsFuel Cells, 2007
- Worldwide SOFC Technology Overview and BenchmarkInternational Journal of Applied Ceramic Technology, 2005
- Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energyRenewable and Sustainable Energy Reviews, 2002
- A new type of amperometric oxygen sensor based on a mixed-conducting composite membraneSensors and Actuators B: Chemical, 2001