An Anatomical-Based Subject-Specific Model of In-Vivo Knee Joint 3D Kinematics From Medical Imaging
Open Access
- 20 March 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (6) , 2100
Abstract
Biomechanical models of the knee joint allow the development of accurate procedures as well as novel devices to restore the joint natural motion. They are also used within musculoskeletal models to perform clinical gait analysis on patients. Among relevant knee models in the literature, the anatomy-based spatial parallel mechanisms represent the joint motion using rigid links for the ligaments’ isometric fibres and point contacts for the articular surfaces. To customize analyses, therapies and devices, there is the need to define subject-specific models, but relevant procedures and their accuracy are still questioned. A procedure is here proposed and validated to define a customized knee model based on a spatial parallel mechanism. Computed tomography, magnetic resonance and 3D-video-fluoroscopy were performed on a healthy volunteer to define the personalized model geometry. The model was then validated by comparing the measured and the replicated joint motion. The model showed mean absolute difference and standard deviations in translations and rotations, respectively of mm and for the tibia–femur motion, and of mm and for the patella–femur motion. These results show that accurate personalized spatial models of knee kinematics can be obtained from in-vivo imaging.
Keywords
This publication has 43 references indexed in Scilit:
- Influence of model complexity and problem formulation on the forces in the knee calculated using optimization methodsBioMedical Engineering OnLine, 2013
- Femoral loads during gait in a patient with massive skeletal reconstructionClinical Biomechanics, 2012
- A New Kinematic Model of the Passive Motion of the Knee Inclusive of the PatellaJournal of Mechanisms and Robotics, 2011
- In‐Vivo knee kinematics in rotationally unconstrained total knee arthroplastyJournal of Orthopaedic Research, 2011
- A 1-Dof parallel spherical wrist for the modelling of the knee passive motionMechanism and Machine Theory, 2010
- Femoral rollback of cruciate-retaining and posterior-stabilized total knee replacements: In vivo fluoroscopic analysis during activities of daily livingJournal of Orthopaedic Research, 2006
- Review of Knee Models: 1996 UpdateApplied Mechanics Reviews, 1996
- Accurate measurement of three-dimensional knee replacement kinematics using single-plane fluoroscopyIEEE Transactions on Biomedical Engineering, 1996
- A planar model of the knee joint to characterize the knee extensor mechanismJournal of Biomechanics, 1989
- The Cruciate Ligaments of the Knee JointClinical Orthopaedics and Related Research, 1975